#!/bin/bash
. /opt/pihole/webpage.sh
setupVars="$setupVars"
ServerIP="$ServerIP"
ServerIPv6="$ServerIPv6"
IPv6="$IPv6"

prepare_setup_vars() {
    touch "$setupVars"
}

validate_env() {
    if [ -z "$ServerIP" ] ; then
      echo "ERROR: To function correctly you must pass an environment variables of 'ServerIP' into the docker container with the IP of your docker host from which you are passing web (80) and dns (53) ports from"
      exit 1
    fi;

    # Debian
    nc_error='Name or service not known'
    if [[ "$TAG" == 'alpine' ]] ; then
        nc_error='bad address' 
    fi;

    # Required ServerIP is a valid IP
    if nc -w1 -z "$ServerIP" 53 2>&1 | grep -q "$nc_error" ; then
        echo "ERROR: ServerIP Environment variable ($ServerIP) doesn't appear to be a valid IPv4 address"
        exit 1
    fi

    # Optional IPv6 is a valid address
    if [[ -n "$ServerIPv6" ]] ; then
        if [[ "$ServerIPv6" == 'kernel' ]] ; then
            echo "WARNING: You passed in IPv6 with a value of 'kernel', this maybe beacuse you do not have IPv6 enabled on your network"
            unset ServerIPv6
            return
        fi
        if nc -w 1 -z "$ServerIPv6" 53 2>&1 | grep -q "$nc_error" || ! ip route get "$ServerIPv6" ; then
            echo "ERROR: ServerIPv6 Environment variable ($ServerIPv6) doesn't appear to be a valid IPv6 address"
            echo "  TIP: If your server is not IPv6 enabled just remove '-e ServerIPv6' from your docker container"
            exit 1
        fi
    fi;
}

setup_dnsmasq_dns() {
    . /opt/pihole/webpage.sh
    local DNS1="${1:-8.8.8.8}"
    local DNS2="${2:-8.8.4.4}"
    local dnsType='default'
    if [ "$DNS1" != '8.8.8.8' ] || [ "$DNS2" != '8.8.4.4' ] ; then
      dnsType='custom'
    fi;

    echo "Using $dnsType DNS servers: $DNS1 & $DNS2"
	[ -n "$DNS1" ] && change_setting "PIHOLE_DNS_1" "${DNS1}"
	[ -n "$DNS2" ] && change_setting "PIHOLE_DNS_2" "${DNS2}"
}

setup_dnsmasq_interface() {
    local INTERFACE="${1:-eth0}"
    local interfaceType='default'
    if [ "$INTERFACE" != 'eth0' ] ; then
      interfaceType='custom'
    fi;
    echo "DNSMasq binding to $interfaceType interface: $INTERFACE"
	[ -n "$INTERFACE" ] && change_setting "PIHOLE_INTERFACE" "${INTERFACE}"
}

setup_dnsmasq_config_if_missing() {
    # When fresh empty directory volumes are used we miss this file
    if [ ! -f /etc/dnsmasq.d/01-pihole.conf ] ; then
        cp /etc/.pihole/advanced/01-pihole.conf /etc/dnsmasq.d/
    fi;
}

setup_dnsmasq() {
    # Coordinates 
    setup_dnsmasq_config_if_missing
    setup_dnsmasq_dns "$DNS1" "$DNS2" 
    setup_dnsmasq_interface "$INTERFACE"
    ProcessDNSSettings
}

setup_dnsmasq_hostnames() {
    # largely borrowed from automated install/basic-install.sh
    local IPV4_ADDRESS="${1}"
    local IPV6_ADDRESS="${2}"
    local hostname="${3}"
    local dnsmasq_pihole_01_location="/etc/dnsmasq.d/01-pihole.conf"

    if [ -z "$hostname" ]; then
        if [[ -f /etc/hostname ]]; then
            hostname=$(</etc/hostname)
        elif [ -x "$(command -v hostname)" ]; then
            hostname=$(hostname -f)
        fi
    fi;

    if [[ "${IPV4_ADDRESS}" != "" ]]; then
        tmp=${IPV4_ADDRESS%/*}
        sed -i "s/@IPV4@/$tmp/" ${dnsmasq_pihole_01_location}
    else
        sed -i '/^address=\/pi.hole\/@IPV4@/d' ${dnsmasq_pihole_01_location}
        sed -i '/^address=\/@HOSTNAME@\/@IPV4@/d' ${dnsmasq_pihole_01_location}
    fi

    if [[ "${IPV6_ADDRESS}" != "" ]]; then
        sed -i "s/@IPv6@/$IPV6_ADDRESS/" ${dnsmasq_pihole_01_location}
    else
        sed -i '/^address=\/pi.hole\/@IPv6@/d' ${dnsmasq_pihole_01_location}
        sed -i '/^address=\/@HOSTNAME@\/@IPv6@/d' ${dnsmasq_pihole_01_location}
    fi

    if [[ "${hostname}" != "" ]]; then
        sed -i "s/@HOSTNAME@/$hostname/" ${dnsmasq_pihole_01_location}
    else
        sed -i '/^address=\/@HOSTNAME@*/d' ${dnsmasq_pihole_01_location}
    fi
}

setup_lighttpd_bind() {
    if [[ "$TAG" == 'debian' ]] ; then
    # if using '--net=host' only bind lighttpd on $ServerIP
        if grep -q "docker" /proc/net/dev ; then #docker (docker0 by default) should only be present on the host system
            if ! grep -q "server.bind" /etc/lighttpd/lighttpd.conf ; then # if the declaration is already there, don't add it again
                sed -i -E "s/server\.port\s+\=\s+80/server.bind\t\t = \"${ServerIP}\"\nserver.port\t\t = 80/" /etc/lighttpd/lighttpd.conf
            fi
        fi
    fi
}

setup_php_env() {
    case $TAG in
        "debian") setup_php_env_debian ;;
        "alpine") setup_php_env_alpine ;;
    esac
}

setup_php_env_debian() {
    if [ -z "$VIRTUAL_HOST" ] ; then
      VIRTUAL_HOST="$ServerIP"
    fi;
    local vhost_line="\t\t\t\"VIRTUAL_HOST\" => \"${VIRTUAL_HOST}\","
    local serverip_line="\t\t\t\"ServerIP\" => \"${ServerIP}\","
    local php_error_line="\t\t\t\"PHP_ERROR_LOG\" => \"${PHP_ERROR_LOG}\","

    # idempotent line additions
    grep -qP "$vhost_line" "$PHP_ENV_CONFIG" || \
        sed -i "/bin-environment/ a\\${vhost_line}" "$PHP_ENV_CONFIG"
    grep -qP "$serverip_line" "$PHP_ENV_CONFIG" || \
        sed -i "/bin-environment/ a\\${serverip_line}" "$PHP_ENV_CONFIG"
    grep -qP "$php_error_line" "$PHP_ENV_CONFIG" || \
        sed -i "/bin-environment/ a\\${php_error_line}" "$PHP_ENV_CONFIG"

    echo "Added ENV to php:"
    grep -E '(VIRTUAL_HOST|ServerIP|PHP_ERROR_LOG)' "$PHP_ENV_CONFIG"
}

setup_php_env_alpine() {
    # Intentionally tabs, required by HEREDOC de-indentation (<<-)
    cat <<-EOF > "$PHP_ENV_CONFIG"
		[www]
		env[PATH] = ${PATH}
		env[PHP_ERROR_LOG] = ${PHP_ERROR_LOG}
		env[ServerIP] = ${ServerIP}
	EOF

    if [ -z "$VIRTUAL_HOST" ] ; then
      VIRTUAL_HOST="$ServerIP"
    fi;
    echo "env[VIRTUAL_HOST] = ${VIRTUAL_HOST}" >> "$PHP_ENV_CONFIG";

    echo "Added ENV to php:"
    cat "$PHP_ENV_CONFIG"
}

setup_web_password() {
    if [ -z "${WEBPASSWORD+x}" ] ; then 
        # Not set at all, give the user a random pass
        WEBPASSWORD=$(tr -dc _A-Z-a-z-0-9 < /dev/urandom | head -c 8)
        echo "Assigning random password: $WEBPASSWORD"
    fi;
    set -x
    if [[ "$WEBPASSWORD" == "" ]] ; then
		echo "" | pihole -a -p
    else
		pihole -a -p "$WEBPASSWORD" "$WEBPASSWORD"
	fi
    { set +x; } 2>/dev/null
}
setup_ipv4_ipv6() {
    local ip_versions="IPv4 and IPv6"
    if [ "$IPv6" != "True" ] ; then
        ip_versions="IPv4"
        case $TAG in
            "debian") sed -i '/use-ipv6.pl/ d' /etc/lighttpd/lighttpd.conf ;;
            "alpine") sed -i '/listen \[::\]:80/ d' /etc/nginx/nginx.conf ;;
        esac
    fi;
    echo "Using $ip_versions"
}

test_configs() {
    case $TAG in
        "debian") test_configs_debian ;;
        "alpine") test_configs_alpine ;;
    esac
}

test_configs_debian() {
    set -e
    echo -n '::: Testing DNSmasq config: '
    dnsmasq --test -7 /etc/dnsmasq.d
    echo -n '::: Testing lighttpd config: '
    lighttpd -t -f /etc/lighttpd/lighttpd.conf
    set +e
    echo "::: All config checks passed, starting ..."
}

test_configs_alpine() {
    set -e
    echo -n '::: Testing DNSmasq config: '
    dnsmasq --test -7 /etc/dnsmasq.d
    echo -n '::: Testing PHP-FPM config: '
    php-fpm5 -t
    echo -n '::: Testing NGINX config: '
    nginx -t
    set +e
    echo "::: All config checks passed, starting ..."
}

test_framework_stubbing() {
    if [ -n "$PYTEST" ] ; then 
		echo ":::::: Tests are being ran - stub out ad list fetching and add a fake ad block"
		sed -i 's/^gravity_spinup$/#gravity_spinup # DISABLED FOR PYTEST/g' "$(which gravity.sh)" 
		echo 'testblock.pi-hole.local' >> /etc/pihole/blacklist.txt
	fi
}

docker_main() {
    echo -n '::: Starting up DNS and Webserver ...'
    service dnsmasq restart # Just get DNS up. The webserver is down!!!

    TAG="$1"
    case $TAG in # Setup webserver
        "alpine")
            php-fpm5
            nginx
        ;;
        "debian")
            service lighttpd start
        ;;
    esac

    gravity.sh # Finally lets update and be awesome.
    tail -F "${WEBLOGDIR}"/*.log /var/log/pihole.log
}