#!/usr/bin/env bats
load 'test_helper/common'
# Globals ${BATS_TMPDIR} and ${NAME}
# `${NAME}` defaults to `mailserver-testing:ci`

function setup() {
    run_setup_file_if_necessary
}

function teardown() {
    docker rm -f tls_test_cipherlists
    run_teardown_file_if_necessary
}

function setup_file() {
    export DOMAIN="example.test"
    export NETWORK="test-network"

    # Shared config for TLS testing (read-only)
    export TLS_CONFIG_VOLUME
    TLS_CONFIG_VOLUME="$(pwd)/test/test-files/ssl/${DOMAIN}/:/config/ssl/:ro"
    # `${BATS_TMPDIR}` maps to `/tmp`
    export TLS_RESULTS_DIR="${BATS_TMPDIR}/results"

    # NOTE: If the network already exists, test will fail to start.
    docker network create "${NETWORK}"

    # Copies all of `./test/config/` to specific directory for testing
    # `${PRIVATE_CONFIG}` becomes `$(pwd)/test/duplicate_configs/<bats test filename>`
    export PRIVATE_CONFIG
    PRIVATE_CONFIG="$(duplicate_config_for_container .)"

    # Pull `testssl.sh` image in advance to avoid it interfering with the `run` captured output.
    # Only interferes (potential test failure) with `assert_output` not `assert_success`?
    docker pull drwetter/testssl.sh:3.1dev
}

function teardown_file() {
    docker network rm "${NETWORK}"
}

@test "first" {
  skip 'this test must come first to reliably identify when to run setup_file'
}

@test "checking tls: cipher list - rsa intermediate" {
    check_ports 'rsa' 'intermediate'
}

@test "checking tls: cipher list - rsa modern" {
    check_ports 'rsa' 'modern'
}

@test "checking tls: cipher list - ecdsa intermediate" {
    check_ports 'ecdsa' 'intermediate'
}

@test "checking tls: cipher list - ecdsa modern" {
    check_ports 'ecdsa' 'modern'
}


# Only ECDSA with RSA fallback is tested.
# There isn't a situation where RSA with ECDSA fallback would make sense.
@test "checking tls: cipher list - ecdsa intermediate, with rsa fallback" {
    check_ports 'ecdsa' 'intermediate' 'rsa'
}

@test "checking tls: cipher list - ecdsa modern, with rsa fallback" {
    check_ports 'ecdsa' 'modern' 'rsa'
}

function check_ports() {
    local KEY_TYPE=$1
    local TLS_LEVEL=$2
    local ALT_KEY_TYPE=$3 # Optional parameter

    local KEY_TYPE_LABEL="${KEY_TYPE}"
    # This is just to add a `_` delimiter between the two key types for readability
    if [[ -n ${ALT_KEY_TYPE} ]]
    then
      KEY_TYPE_LABEL="${KEY_TYPE}_${ALT_KEY_TYPE}"
    fi
    local RESULTS_PATH="${KEY_TYPE_LABEL}/${TLS_LEVEL}"

    collect_cipherlist_data

    # SMTP: Opportunistic STARTTLS Explicit(25)
    # Needs to test against cipher lists specific to Port 25 ('_p25' parameter)
    check_cipherlists "${RESULTS_PATH}/port_25.json" '_p25'
    # SMTP Submission: Mandatory STARTTLS Explicit(587) and Implicit(465) TLS
    check_cipherlists "${RESULTS_PATH}/port_587.json"
    check_cipherlists "${RESULTS_PATH}/port_465.json"
    # IMAP: Mandatory STARTTLS Explicit(143) and Implicit(993) TLS
    check_cipherlists "${RESULTS_PATH}/port_143.json"
    check_cipherlists "${RESULTS_PATH}/port_993.json"
    # POP3: Mandatory STARTTLS Explicit(110) and Implicit(995)
    check_cipherlists "${RESULTS_PATH}/port_110.json"
    check_cipherlists "${RESULTS_PATH}/port_995.json"
}

function collect_cipherlist_data() {
    local ALT_CERT=()
    local ALT_KEY=()

    if [[ -n ${ALT_KEY_TYPE} ]]
    then
        ALT_CERT=(--env SSL_ALT_CERT_PATH="/config/ssl/cert.${ALT_KEY_TYPE}.pem")
        ALT_KEY=(--env SSL_ALT_KEY_PATH="/config/ssl/key.${ALT_KEY_TYPE}.pem")
    fi

    run docker run -d --name tls_test_cipherlists \
        --volume "${PRIVATE_CONFIG}/:/tmp/docker-mailserver/" \
        --volume "${TLS_CONFIG_VOLUME}" \
        --env DMS_DEBUG=0 \
        --env ENABLE_POP3=1 \
        --env SSL_TYPE="manual" \
        --env SSL_CERT_PATH="/config/ssl/cert.${KEY_TYPE}.pem" \
        --env SSL_KEY_PATH="/config/ssl/key.${KEY_TYPE}.pem" \
        "${ALT_CERT[@]}" \
        "${ALT_KEY[@]}" \
        --env TLS_LEVEL="${TLS_LEVEL}" \
        --network "${NETWORK}" \
        --network-alias "${DOMAIN}" \
        --hostname "mail.${DOMAIN}" \
        --tty \
        "${NAME}" # Image name
    assert_success

    wait_for_finished_setup_in_container tls_test_cipherlists
    # NOTE: An rDNS query for the container IP will resolve to `<container name>.<network name>.`

    # Make directory with test user ownership. Avoids Docker creating with root ownership.
    # TODO: Can switch to filename prefix for JSON output when this is resolved: https://github.com/drwetter/testssl.sh/issues/1845
    mkdir -p "${TLS_RESULTS_DIR}/${RESULTS_PATH}"

    # For non-CI test runs, instead of removing prior test files after this test suite completes,
    # they're retained and overwritten by future test runs instead. Useful for inspection.
    # `--preference` reduces the test scope to the cipher suites reported as supported by the server. Completes in ~35% of the time.
    local TESTSSL_CMD=(--quiet --file "/config/ssl/testssl.txt" --mode parallel --overwrite --preference)
    # NOTE: Batch testing ports via `--file` doesn't properly bubble up failure.
    # If the failure for a test is misleading consider testing a single port with:
    # local TESTSSL_CMD=(--quiet --jsonfile-pretty "${RESULTS_PATH}/port_${PORT}.json" --starttls smtp "${DOMAIN}:${PORT}")
    # TODO: Can use `jq` to check for failure when this is resolved: https://github.com/drwetter/testssl.sh/issues/1844

    # `--user "<uid>:<gid>"` is a workaround: Avoids `permission denied` write errors for json output, uses `id` to match user uid & gid.
    run docker run --rm \
        --user "$(id -u):$(id -g)" \
        --network "${NETWORK}" \
        --volume "${TLS_CONFIG_VOLUME}" \
        --volume "${TLS_RESULTS_DIR}/${RESULTS_PATH}/:/output" \
        --workdir "/output" \
        drwetter/testssl.sh:3.1dev "${TESTSSL_CMD[@]}"
    assert_success
}

# Use `jq` to extract a specific cipher list from the target`testssl.sh` results json output file
function compare_cipherlist() {
    local TARGET_CIPHERLIST=$1
    local RESULTS_FILE=$2
    local EXPECTED_CIPHERLIST=$3

    run jq '.scanResult[0].fs[] | select(.id=="'"${TARGET_CIPHERLIST}"'") | .finding' "${TLS_RESULTS_DIR}/${RESULTS_FILE}"
    assert_success
    assert_output "${EXPECTED_CIPHERLIST}"
}

# Compares the expected cipher lists against logged test results from `testssl.sh`
function check_cipherlists() {
    local RESULTS_FILE=$1
    local p25=$2 # optional suffix

    # TLS_LEVEL `modern` doesn't have TLS v1.0 or v1.1 cipher suites. Sets TLS v1.2 as minimum.
    if [[ "${TLS_LEVEL}" == "intermediate" ]]
        then
            compare_cipherlist "cipherorder_TLSv1"   "${RESULTS_FILE}" "$(get_cipherlist "TLSv1${p25}")"
            compare_cipherlist "cipherorder_TLSv1_1" "${RESULTS_FILE}" "$(get_cipherlist "TLSv1_1${p25}")"
    fi
    compare_cipherlist "cipherorder_TLSv1_2" "${RESULTS_FILE}" "$(get_cipherlist "TLSv1_2${p25}")"
    compare_cipherlist "cipherorder_TLSv1_3" "${RESULTS_FILE}" "$(get_cipherlist 'TLSv1_3')"
}

# Expected cipher lists. Should match `TLS_LEVEL` cipher lists set in `start-mailserver.sh`.
# Excluding Port 25 which uses defaults from Postfix after applying `smtpd_tls_exclude_ciphers` rules.
# NOTE: If a test fails, look at the `check_ports` params, then update the corresponding associative key's value
# with the `actual` error value (assuming an update needs to be made, and not a valid security issue to look into).
function get_cipherlist() {
    local TLS_VERSION=$1

    if [[ "${TLS_VERSION}" == "TLSv1_3" ]]
        then
            # TLS v1.3 cipher suites are not user defineable and not unique to the available certificate(s).
            # They do not support server enforced order either.
            echo '"TLS_AES_256_GCM_SHA384 TLS_CHACHA20_POLY1305_SHA256 TLS_AES_128_GCM_SHA256"'
        else

        # Associative array for easy querying of required cipher list
        declare -A CIPHER_LIST

        # `intermediate` cipher lists TLS v1.0 and v1.1 cipher suites should be the same:
        CIPHER_LIST["rsa_intermediate_TLSv1"]='"ECDHE-RSA-AES128-SHA ECDHE-RSA-AES256-SHA DHE-RSA-AES128-SHA DHE-RSA-AES256-SHA"'
        CIPHER_LIST["rsa_intermediate_TLSv1_1"]=${CIPHER_LIST["rsa_intermediate_TLSv1"]}
        CIPHER_LIST["rsa_intermediate_TLSv1_2"]='"ECDHE-RSA-CHACHA20-POLY1305 ECDHE-RSA-AES128-GCM-SHA256 ECDHE-RSA-AES256-GCM-SHA384 DHE-RSA-AES128-GCM-SHA256 DHE-RSA-AES256-GCM-SHA384 ECDHE-RSA-AES128-SHA256 ECDHE-RSA-AES256-SHA384 ECDHE-RSA-AES128-SHA ECDHE-RSA-AES256-SHA DHE-RSA-AES128-SHA256 DHE-RSA-AES128-SHA DHE-RSA-AES256-SHA256 DHE-RSA-AES256-SHA"'
        # `modern` cipher lists shouldn't have TLS v1.0 or v1.1 cipher suites:
        CIPHER_LIST["rsa_modern_TLSv1_2"]='"ECDHE-RSA-AES128-GCM-SHA256 ECDHE-RSA-AES256-GCM-SHA384 ECDHE-RSA-CHACHA20-POLY1305 DHE-RSA-AES128-GCM-SHA256 DHE-RSA-AES256-GCM-SHA384"'

        # ECDSA:
        CIPHER_LIST["ecdsa_intermediate_TLSv1"]='"ECDHE-ECDSA-AES128-SHA ECDHE-ECDSA-AES256-SHA"'
        CIPHER_LIST["ecdsa_intermediate_TLSv1_1"]=${CIPHER_LIST["ecdsa_intermediate_TLSv1"]}
        CIPHER_LIST["ecdsa_intermediate_TLSv1_2"]='"ECDHE-ECDSA-CHACHA20-POLY1305 ECDHE-ECDSA-AES128-GCM-SHA256 ECDHE-ECDSA-AES256-GCM-SHA384 ECDHE-ECDSA-AES128-SHA256 ECDHE-ECDSA-AES128-SHA ECDHE-ECDSA-AES256-SHA384 ECDHE-ECDSA-AES256-SHA"'
        CIPHER_LIST["ecdsa_modern_TLSv1_2"]='"ECDHE-ECDSA-AES128-GCM-SHA256 ECDHE-ECDSA-AES256-GCM-SHA384 ECDHE-ECDSA-CHACHA20-POLY1305"'

        # ECDSA + RSA fallback, dual cert support:
        CIPHER_LIST["ecdsa_rsa_intermediate_TLSv1"]='"ECDHE-ECDSA-AES128-SHA ECDHE-RSA-AES128-SHA ECDHE-ECDSA-AES256-SHA ECDHE-RSA-AES256-SHA DHE-RSA-AES128-SHA DHE-RSA-AES256-SHA"'
        CIPHER_LIST["ecdsa_rsa_intermediate_TLSv1_1"]=${CIPHER_LIST["ecdsa_rsa_intermediate_TLSv1"]}
        CIPHER_LIST["ecdsa_rsa_intermediate_TLSv1_2"]='"ECDHE-ECDSA-CHACHA20-POLY1305 ECDHE-RSA-CHACHA20-POLY1305 ECDHE-ECDSA-AES128-GCM-SHA256 ECDHE-RSA-AES128-GCM-SHA256 ECDHE-ECDSA-AES256-GCM-SHA384 ECDHE-RSA-AES256-GCM-SHA384 DHE-RSA-AES128-GCM-SHA256 DHE-RSA-AES256-GCM-SHA384 ECDHE-ECDSA-AES128-SHA256 ECDHE-RSA-AES128-SHA256 ECDHE-ECDSA-AES128-SHA ECDHE-RSA-AES256-SHA384 ECDHE-RSA-AES128-SHA ECDHE-ECDSA-AES256-SHA384 ECDHE-ECDSA-AES256-SHA ECDHE-RSA-AES256-SHA DHE-RSA-AES128-SHA256 DHE-RSA-AES128-SHA DHE-RSA-AES256-SHA256 DHE-RSA-AES256-SHA"'
        CIPHER_LIST["ecdsa_rsa_modern_TLSv1_2"]='"ECDHE-ECDSA-AES128-GCM-SHA256 ECDHE-RSA-AES128-GCM-SHA256 ECDHE-ECDSA-AES256-GCM-SHA384 ECDHE-RSA-AES256-GCM-SHA384 ECDHE-ECDSA-CHACHA20-POLY1305 ECDHE-RSA-CHACHA20-POLY1305 DHE-RSA-AES128-GCM-SHA256 DHE-RSA-AES256-GCM-SHA384"'


        # Port 25
        # TLSv1 and TLSv1_1 share the same cipher suites as other ports have. But the server order differs:
        CIPHER_LIST["rsa_intermediate_TLSv1_p25"]='"ECDHE-RSA-AES256-SHA DHE-RSA-AES256-SHA ECDHE-RSA-AES128-SHA DHE-RSA-AES128-SHA"'
        CIPHER_LIST["rsa_intermediate_TLSv1_1_p25"]=${CIPHER_LIST["rsa_intermediate_TLSv1_p25"]}
        # TLSv1_2 has different server order and also includes ARIA, CCM, DHE+CHACHA20-POLY1305 cipher suites:
        CIPHER_LIST["rsa_intermediate_TLSv1_2_p25"]='"ECDHE-RSA-AES256-GCM-SHA384 DHE-RSA-AES256-GCM-SHA384 ECDHE-RSA-CHACHA20-POLY1305 DHE-RSA-CHACHA20-POLY1305 DHE-RSA-AES256-CCM8 DHE-RSA-AES256-CCM ECDHE-ARIA256-GCM-SHA384 DHE-RSA-ARIA256-GCM-SHA384 ECDHE-RSA-AES256-SHA384 DHE-RSA-AES256-SHA256 ECDHE-RSA-AES256-SHA DHE-RSA-AES256-SHA ARIA256-GCM-SHA384 ECDHE-RSA-AES128-GCM-SHA256 DHE-RSA-AES128-GCM-SHA256 DHE-RSA-AES128-CCM8 DHE-RSA-AES128-CCM ECDHE-ARIA128-GCM-SHA256 DHE-RSA-ARIA128-GCM-SHA256 ECDHE-RSA-AES128-SHA256 DHE-RSA-AES128-SHA256 ECDHE-RSA-AES128-SHA DHE-RSA-AES128-SHA ARIA128-GCM-SHA256"'
        # Port 25 is unaffected by `TLS_LEVEL` profiles (other than min TLS version), it has the same TLS v1.2 cipher list under both:
        CIPHER_LIST["rsa_modern_TLSv1_2_p25"]=${CIPHER_LIST["rsa_intermediate_TLSv1_2_p25"]}

        # ECDSA (Port 25):
        CIPHER_LIST["ecdsa_intermediate_TLSv1_p25"]='"ECDHE-ECDSA-AES256-SHA ECDHE-ECDSA-AES128-SHA"'
        CIPHER_LIST["ecdsa_intermediate_TLSv1_1_p25"]=${CIPHER_LIST["ecdsa_intermediate_TLSv1_p25"]}

        CIPHER_LIST["ecdsa_intermediate_TLSv1_2_p25"]='"ECDHE-ECDSA-AES256-GCM-SHA384 ECDHE-ECDSA-CHACHA20-POLY1305 ECDHE-ECDSA-AES256-CCM8 ECDHE-ECDSA-AES256-CCM ECDHE-ECDSA-ARIA256-GCM-SHA384 ECDHE-ECDSA-AES256-SHA384 ECDHE-ECDSA-AES256-SHA ECDHE-ECDSA-AES128-GCM-SHA256 ECDHE-ECDSA-AES128-CCM8 ECDHE-ECDSA-AES128-CCM ECDHE-ECDSA-ARIA128-GCM-SHA256 ECDHE-ECDSA-AES128-SHA256 ECDHE-ECDSA-AES128-SHA"'
        CIPHER_LIST["ecdsa_modern_TLSv1_2_p25"]=${CIPHER_LIST["ecdsa_intermediate_TLSv1_2_p25"]}


        # ECDSA + RSA fallback, dual cert support (Port 25):
        CIPHER_LIST["ecdsa_rsa_intermediate_TLSv1_p25"]='"ECDHE-ECDSA-AES256-SHA ECDHE-RSA-AES256-SHA DHE-RSA-AES256-SHA ECDHE-ECDSA-AES128-SHA ECDHE-RSA-AES128-SHA DHE-RSA-AES128-SHA"'
        CIPHER_LIST["ecdsa_rsa_intermediate_TLSv1_1_p25"]=${CIPHER_LIST["ecdsa_rsa_intermediate_TLSv1_p25"]}

        CIPHER_LIST["ecdsa_rsa_intermediate_TLSv1_2_p25"]='"ECDHE-ECDSA-AES256-GCM-SHA384 ECDHE-RSA-AES256-GCM-SHA384 DHE-RSA-AES256-GCM-SHA384 ECDHE-ECDSA-CHACHA20-POLY1305 ECDHE-RSA-CHACHA20-POLY1305 DHE-RSA-CHACHA20-POLY1305 ECDHE-ECDSA-AES256-CCM8 ECDHE-ECDSA-AES256-CCM DHE-RSA-AES256-CCM8 DHE-RSA-AES256-CCM ECDHE-ECDSA-ARIA256-GCM-SHA384 ECDHE-ARIA256-GCM-SHA384 DHE-RSA-ARIA256-GCM-SHA384 ECDHE-ECDSA-AES256-SHA384 ECDHE-RSA-AES256-SHA384 DHE-RSA-AES256-SHA256 ECDHE-ECDSA-AES256-SHA ECDHE-RSA-AES256-SHA DHE-RSA-AES256-SHA ARIA256-GCM-SHA384 ECDHE-ECDSA-AES128-GCM-SHA256 ECDHE-RSA-AES128-GCM-SHA256 DHE-RSA-AES128-GCM-SHA256 ECDHE-ECDSA-AES128-CCM8 ECDHE-ECDSA-AES128-CCM DHE-RSA-AES128-CCM8 DHE-RSA-AES128-CCM ECDHE-ECDSA-ARIA128-GCM-SHA256 ECDHE-ARIA128-GCM-SHA256 DHE-RSA-ARIA128-GCM-SHA256 ECDHE-ECDSA-AES128-SHA256 ECDHE-RSA-AES128-SHA256 DHE-RSA-AES128-SHA256 ECDHE-ECDSA-AES128-SHA ECDHE-RSA-AES128-SHA DHE-RSA-AES128-SHA ARIA128-GCM-SHA256"'
        CIPHER_LIST["ecdsa_rsa_modern_TLSv1_2_p25"]=${CIPHER_LIST["ecdsa_rsa_intermediate_TLSv1_2_p25"]}


        local TARGET_QUERY="${KEY_TYPE_LABEL}_${TLS_LEVEL}_${TLS_VERSION}"
        echo "${CIPHER_LIST[${TARGET_QUERY}]}"
    fi
}

@test "last" {
  skip 'this test is only there to reliably mark the end for the teardown_file'
}