#!/bin/bash # ? ABOUT: Functions defined here aid with common functionality during tests. # ! ATTENTION: Functions prefixed with `__` are intended for internal use within this file only, not in tests. # ! ------------------------------------------------------------------- # ? >> Miscellaneous initialization functionality # shellcheck disable=SC2155 # Load additional BATS libraries for more functionality. # # ## Note # # This function is internal and should not be used in tests. function __load_bats_helper() { load "${REPOSITORY_ROOT}/test/test_helper/bats-support/load" load "${REPOSITORY_ROOT}/test/test_helper/bats-assert/load" load "${REPOSITORY_ROOT}/test/helper/sending" } __load_bats_helper # Properly handle the container name given to tests. This makes the whole # test suite more robust as we can be sure that the container name is # properly set. Sometimes, we need to provide an explicit container name; # this function eases the pain by either providing the explicitly given # name or `CONTAINER_NAME` if it is set. # # @param ${1} = explicit container name [OPTIONAL] # # ## Attention # # Note that this function checks whether the name given to it starts with # the prefix `dms-test_`. One must adhere to this naming convention. # # ## Panics # # If neither an explicit non-empty argument is given nor `CONTAINER_NAME` # is set. # # ## "Calling Convention" # # This function should be called the following way: # # local SOME_VAR=$(__handle_container_name "${X:-}") # # Where `X` is an arbitrary argument of the function you're calling. # # ## Note # # This function is internal and should not be used in tests. function __handle_container_name() { if [[ -n ${1:-} ]] && [[ ${1:-} =~ ^dms-test_ ]]; then printf '%s' "${1}" return 0 elif [[ -n ${CONTAINER_NAME+set} ]]; then printf '%s' "${CONTAINER_NAME}" return 0 else echo 'ERROR: (helper/common.sh) Container name was either provided explicitly without the required "dms-test_" prefix, or CONTAINER_NAME is not set for implicit usage' >&2 exit 1 fi } # ? << Miscellaneous initialization functionality # ! ------------------------------------------------------------------- # ? >> Functions to execute commands inside a container # Execute a command inside a container with an explicit name. # # @param ${1} = container name # @param ... = command to execute function _exec_in_container_explicit() { local CONTAINER_NAME=${1:?Container name must be provided when using explicit} shift 1 docker exec "${CONTAINER_NAME}" "${@}" } # Execute a command inside the container with name ${CONTAINER_NAME}. # # @param ... = command to execute function _exec_in_container() { _exec_in_container_explicit "${CONTAINER_NAME:?Container name must be provided}" "${@}" } # Execute a command inside a container with an explicit name. The command is run with # BATS' `run` so you can check the exit code and use `assert_`. # # @param ${1} = container name # @param ... = command to execute function _run_in_container_explicit() { local CONTAINER_NAME=${1:?Container name must be provided when using explicit} shift 1 run _exec_in_container_explicit "${CONTAINER_NAME}" "${@}" } # Execute a command inside the container with name ${CONTAINER_NAME}. The command # is run with BATS' `run` so you can check the exit code and use `assert_`. # # @param ... = command to execute function _run_in_container() { _run_in_container_explicit "${CONTAINER_NAME:?Container name must be provided}" "${@}" } # Execute a command inside the container with name ${CONTAINER_NAME}. Moreover, # the command is run by Bash with `/bin/bash -c`. # # @param ... = command to execute with Bash function _exec_in_container_bash() { _exec_in_container /bin/bash -c "${@}" ; } # Execute a command inside the container with name ${CONTAINER_NAME}. The command # is run with BATS' `run` so you can check the exit code and use `assert_`. Moreover, # the command is run by Bash with `/bin/bash -c`. # # @param ... = Bash command to execute function _run_in_container_bash() { _run_in_container /bin/bash -c "${@}" ; } # Run a command in Bash and filter the output given a regex. # # @param ${1} = command to run in Bash # @param ${2} = regex to filter [OPTIONAL] # # ## Attention # # The regex is given to `grep -E`, so make sure it is compatible. # # ## Note # # If no regex is provided, this function will default to one that strips # empty lines and Bash comments from the output. function _run_in_container_bash_and_filter_output() { local COMMAND=${1:?Command must be provided} local FILTER_REGEX=${2:-^[[:space:]]*$|^ *#} _run_in_container_bash "${COMMAND} | grep -E -v '${FILTER_REGEX}'" assert_success } # ? << Functions to execute commands inside a container # ! ------------------------------------------------------------------- # ? >> Functions about executing commands with timeouts # Repeats a given command inside a container until the timeout is over. # # @param ${1} = timeout # @param ${2} = container name # @param ... = test command for container function _repeat_in_container_until_success_or_timeout() { local TIMEOUT="${1:?Timeout duration must be provided}" local CONTAINER_NAME="${2:?Container name must be provided}" shift 2 _repeat_until_success_or_timeout \ --fatal-test "_container_is_running ${CONTAINER_NAME}" \ "${TIMEOUT}" \ _exec_in_container "${@}" } # Repeats a given command until the timeout is over. # # @option --fatal-test = additional test whose failure aborts immediately # @param ${1} = timeout # @param ... = test to run function _repeat_until_success_or_timeout() { local FATAL_FAILURE_TEST_COMMAND if [[ "${1:-}" == "--fatal-test" ]]; then FATAL_FAILURE_TEST_COMMAND="${2:?Provided --fatal-test but no command}" shift 2 fi local TIMEOUT=${1:?Timeout duration must be provided} shift 1 if ! [[ "${TIMEOUT}" =~ ^[0-9]+$ ]]; then echo "First parameter for timeout must be an integer, received \"${TIMEOUT}\"" return 1 fi local STARTTIME=${SECONDS} until "${@}"; do if [[ -n ${FATAL_FAILURE_TEST_COMMAND} ]] && ! eval "${FATAL_FAILURE_TEST_COMMAND}"; then echo "\`${FATAL_FAILURE_TEST_COMMAND}\` failed, early aborting repeat_until_success of \`${*}\`" >&2 return 1 fi sleep 1 if [[ $(( SECONDS - STARTTIME )) -gt ${TIMEOUT} ]]; then echo "Timed out on command: ${*}" >&2 return 1 fi done } # Like `_repeat_until_success_or_timeout` . The command is run with BATS' `run` # so you can check the exit code and use `assert_`. # # @param ${1} = timeout # @param ... = test command to run function _run_until_success_or_timeout() { local TIMEOUT=${1:?Timeout duration must be provided} shift 1 if [[ ! ${TIMEOUT} =~ ^[0-9]+$ ]]; then echo "First parameter for timeout must be an integer, received \"${TIMEOUT}\"" return 1 fi local STARTTIME=${SECONDS} # shellcheck disable=SC2154 until run "${@}" && [[ ${status} -eq 0 ]]; do sleep 1 if (( SECONDS - STARTTIME > TIMEOUT )); then echo "Timed out on command: ${*}" >&2 return 1 fi done } # ? << Functions about executing commands with timeouts # ! ------------------------------------------------------------------- # ? >> Functions to wait until a condition is met # Wait until a port is ready. # # @param ${1} = port # @param ${2} = container name [OPTIONAL] function _wait_for_tcp_port_in_container() { local PORT=${1:?Port number must be provided} local CONTAINER_NAME=$(__handle_container_name "${2:-}") _repeat_until_success_or_timeout \ --fatal-test "_container_is_running ${CONTAINER_NAME}" \ "${TEST_TIMEOUT_IN_SECONDS}" \ _exec_in_container_bash "nc -z 0.0.0.0 ${PORT}" } # Wait for SMTP port (25) to become ready. # # @param ${1} = name of the container [OPTIONAL] function _wait_for_smtp_port_in_container() { local CONTAINER_NAME=$(__handle_container_name "${1:-}") _wait_for_tcp_port_in_container 25 } # Wait until the SMTP port (25) can respond. # # @param ${1} = name of the container [OPTIONAL] function _wait_for_smtp_port_in_container_to_respond() { local CONTAINER_NAME=$(__handle_container_name "${1:-}") local COUNT=0 until [[ $(_exec_in_container timeout 10 /bin/bash -c 'echo QUIT | nc localhost 25') == *'221 2.0.0 Bye'* ]]; do if [[ ${COUNT} -eq 20 ]]; then echo "Unable to receive a valid response from 'nc localhost 25' within 20 seconds" return 1 fi sleep 1 (( COUNT += 1 )) done } # Checks whether a service is running inside a container (${1}). # # @param ${1} = service name # @param ${2} = container name [OPTIONAL] function _should_have_service_running_in_container() { local SERVICE_NAME="${1:?Service name must be provided}" local CONTAINER_NAME=$(__handle_container_name "${2:-}") _run_in_container /usr/bin/supervisorctl status "${SERVICE_NAME}" assert_success assert_output --partial 'RUNNING' } # Wait until a service is running. # # @param ${1} = name of the service to wait for # @param ${2} = container name [OPTIONAL] function _wait_for_service() { local SERVICE_NAME="${1:?Service name must be provided}" local CONTAINER_NAME=$(__handle_container_name "${2:-}") _repeat_until_success_or_timeout \ --fatal-test "_container_is_running ${CONTAINER_NAME}" \ "${TEST_TIMEOUT_IN_SECONDS}" \ _should_have_service_running_in_container "${SERVICE_NAME}" } # An account added to `postfix-accounts.cf` must wait for the `changedetector` service # to process the update before Dovecot creates the mail account and associated storage dir. # # @param ${1} = mail account name # @param ${2} = container name function _wait_until_account_maildir_exists() { local MAIL_ACCOUNT=${1:?Mail account must be provided} local CONTAINER_NAME=$(__handle_container_name "${2:-}") local LOCAL_PART="${MAIL_ACCOUNT%@*}" local DOMAIN_PART="${MAIL_ACCOUNT#*@}" local MAIL_ACCOUNT_STORAGE_DIR="/var/mail/${DOMAIN_PART}/${LOCAL_PART}" _repeat_in_container_until_success_or_timeout 60 "${CONTAINER_NAME}" \ /bin/bash -c "[[ -d ${MAIL_ACCOUNT_STORAGE_DIR} ]]" } # Wait until the mail queue is empty inside a container (${1}). # # @param ${1} = container name [OPTIONAL] function _wait_for_empty_mail_queue_in_container() { local CONTAINER_NAME=$(__handle_container_name "${1:-}") local TIMEOUT=${TEST_TIMEOUT_IN_SECONDS} # shellcheck disable=SC2016 _repeat_in_container_until_success_or_timeout \ "${TIMEOUT}" \ "${CONTAINER_NAME}" \ /bin/bash -c '[[ $(mailq) == "Mail queue is empty" ]]' } # ? << Functions to wait until a condition is met # ! ------------------------------------------------------------------- # ? >> Miscellaneous helper functions # Adds a mail account and waits for the associated files to be created. # # @param ${1} = mail account name # @param ${2} = password [OPTIONAL] # @param ${3} = container name [OPTIONAL] function _add_mail_account_then_wait_until_ready() { local MAIL_ACCOUNT=${1:?Mail account must be provided} local MAIL_PASS="${2:-password_not_relevant_to_test}" local CONTAINER_NAME=$(__handle_container_name "${3:-}") # Required to detect a new account and create the maildir: _wait_for_service changedetector "${CONTAINER_NAME}" _run_in_container setup email add "${MAIL_ACCOUNT}" "${MAIL_PASS}" assert_success _wait_until_account_maildir_exists "${MAIL_ACCOUNT}" } # Assert that the number of lines output by a previous command matches the given # amount (${1}). `lines` is a special BATS variable updated via `run`. # # @param ${1} = number of lines that the output should have function _should_output_number_of_lines() { # shellcheck disable=SC2154 assert_equal "${#lines[@]}" "${1:?Number of lines not provided}" } # Reloads the postfix service. # # @param ${1} = container name [OPTIONAL] function _reload_postfix() { local CONTAINER_NAME=$(__handle_container_name "${1:-}") # Reloading Postfix config after modifying it within 2 seconds will cause Postfix to delay reading `main.cf`: # WORKAROUND: https://github.com/docker-mailserver/docker-mailserver/pull/2998 _exec_in_container touch -d '2 seconds ago' /etc/postfix/main.cf _exec_in_container postfix reload } # Get the IP of the container (${1}). # # @param ${1} = container name [OPTIONAL] function _get_container_ip() { local TARGET_CONTAINER_NAME=$(__handle_container_name "${1:-}") docker inspect --format '{{ .NetworkSettings.IPAddress }}' "${TARGET_CONTAINER_NAME}" } # Check if a container is running. # # @param ${1} = container name [OPTIONAL] function _container_is_running() { local TARGET_CONTAINER_NAME=$(__handle_container_name "${1:-}") [[ $(docker inspect -f '{{.State.Running}}' "${TARGET_CONTAINER_NAME}") == 'true' ]] } # Checks if the directory exists and then how many files it contains at the top-level. # # @param ${1} = directory # @param ${2} = number of files that should be in ${1} function _count_files_in_directory_in_container() { local DIRECTORY=${1:?No directory provided} local NUMBER_OF_LINES=${2:?No line count provided} _should_have_content_in_directory "${DIRECTORY}" '-type f' _should_output_number_of_lines "${NUMBER_OF_LINES}" } # Checks if the directory exists and then list the top-level content. # # @param ${1} = directory # @param ${2} = Additional options to `find` function _should_have_content_in_directory() { local DIRECTORY=${1:?No directory provided} local FIND_OPTIONS=${2:-} _run_in_container_bash "[[ -d ${DIRECTORY} ]] && find ${DIRECTORY} -mindepth 1 -maxdepth 1 ${FIND_OPTIONS} -printf '%f\n'" assert_success } # Filters a service's logs (under `/var/log/supervisor/.log`) given # a specific string. # # @param ${1} = service name # @param ${2} = string to filter by # @param ${3} = container name [OPTIONAL] # # ## Attention # # The string given to this function is interpreted by `grep -E`, i.e. # as a regular expression. In case you use characters that are special # in regular expressions, you need to escape them! function _filter_service_log() { local SERVICE=${1:?Service name must be provided} local STRING=${2:?String to match must be provided} local CONTAINER_NAME=$(__handle_container_name "${3:-}") local FILE="/var/log/supervisor/${SERVICE}.log" # Fallback to alternative log location: [[ -f ${FILE} ]] || FILE="/var/log/mail/${SERVICE}.log" _run_in_container grep -E "${STRING}" "${FILE}" } # Like `_filter_service_log` but asserts that the string was found. # # @param ${1} = service name # @param ${2} = string to filter by # @param ${3} = container name [OPTIONAL] # # ## Attention # # The string given to this function is interpreted by `grep -E`, i.e. # as a regular expression. In case you use characters that are special # in regular expressions, you need to escape them! function _service_log_should_contain_string() { local SERVICE=${1:?Service name must be provided} local STRING=${2:?String to match must be provided} local CONTAINER_NAME=$(__handle_container_name "${3:-}") _filter_service_log "${SERVICE}" "${STRING}" assert_success } # Filters the mail log for lines that belong to a certain email identified # by its ID. You can obtain the ID of an email you want to send by using # `_send_email_and_get_id`. # # @param ${1} = email ID # @param ${2} = container name [OPTIONAL] function _print_mail_log_for_id() { local MAIL_ID=${1:?Mail ID must be provided} local CONTAINER_NAME=$(__handle_container_name "${2:-}") _run_in_container grep -F "${MAIL_ID}" /var/log/mail.log } # ? << Miscellaneous helper functions # ! -------------------------------------------------------------------