load 'test_helper/bats-support/load' load 'test_helper/bats-assert/load' load 'test_helper/common' export IMAGE_NAME IMAGE_NAME="${NAME}" setup_file() { local PRIVATE_CONFIG PRIVATE_CONFIG=$(duplicate_config_for_container . mail) mv "${PRIVATE_CONFIG}/user-patches/user-patches.sh" "${PRIVATE_CONFIG}/user-patches.sh" docker run --rm -d --name mail \ -v "${PRIVATE_CONFIG}":/tmp/docker-mailserver \ -v "$(pwd)/test/test-files":/tmp/docker-mailserver-test:ro \ -v "$(pwd)/test/onedir":/var/mail-state \ -e AMAVIS_LOGLEVEL=2 \ -e CLAMAV_MESSAGE_SIZE_LIMIT=30M \ -e ENABLE_CLAMAV=1 \ -e ENABLE_MANAGESIEVE=1 \ -e ENABLE_QUOTAS=1 \ -e ENABLE_SPAMASSASSIN=1 \ -e ENABLE_SRS=1 \ -e ENABLE_UPDATE_CHECK=0 \ -e PERMIT_DOCKER=container \ -e PERMIT_DOCKER=host \ -e PFLOGSUMM_TRIGGER=logrotate \ -e REPORT_RECIPIENT=user1@localhost.localdomain \ -e REPORT_SENDER=report1@mail.my-domain.com \ -e SA_KILL=3.0 \ -e SA_SPAM_SUBJECT="SPAM: " \ -e SA_TAG=-5.0 \ -e SA_TAG2=2.0 \ -e SASL_PASSWD="external-domain.com username:password" \ -e SPAMASSASSIN_SPAM_TO_INBOX=0 \ -e SPOOF_PROTECTION=1 \ -e SSL_TYPE='snakeoil' \ -e VIRUSMAILS_DELETE_DELAY=7 \ -h mail.my-domain.com \ --cap-add=SYS_PTRACE \ --tty \ "${NAME}" wait_for_finished_setup_in_container mail # generate accounts after container has been started docker run --rm -e MAIL_USER=added@localhost.localdomain -e MAIL_PASS=mypassword -t "${NAME}" /bin/sh -c 'echo "${MAIL_USER}|$(doveadm pw -s SHA512-CRYPT -u ${MAIL_USER} -p ${MAIL_PASS})"' >> "${PRIVATE_CONFIG}/postfix-accounts.cf" docker exec mail addmailuser pass@localhost.localdomain 'may be \a `p^a.*ssword' # setup sieve docker cp "${PRIVATE_CONFIG}/sieve/dovecot.sieve" mail:/var/mail/localhost.localdomain/user1/.dovecot.sieve # this relies on the checksum file beeing updated after all changes have been applied wait_for_changes_to_be_detected_in_container mail wait_for_smtp_port_in_container mail # wait for ClamAV to be fully setup or we will get errors on the log repeat_in_container_until_success_or_timeout 60 mail test -e /var/run/clamav/clamd.ctl # sending test mails docker exec mail /bin/sh -c "nc 0.0.0.0 25 < /tmp/docker-mailserver-test/email-templates/amavis-spam.txt" docker exec mail /bin/sh -c "nc 0.0.0.0 25 < /tmp/docker-mailserver-test/email-templates/amavis-virus.txt" docker exec mail /bin/sh -c "nc 0.0.0.0 25 < /tmp/docker-mailserver-test/email-templates/existing-alias-external.txt" docker exec mail /bin/sh -c "nc 0.0.0.0 25 < /tmp/docker-mailserver-test/email-templates/existing-alias-local.txt" docker exec mail /bin/sh -c "nc 0.0.0.0 25 < /tmp/docker-mailserver-test/email-templates/existing-alias-recipient-delimiter.txt" docker exec mail /bin/sh -c "nc 0.0.0.0 25 < /tmp/docker-mailserver-test/email-templates/existing-user1.txt" docker exec mail /bin/sh -c "nc 0.0.0.0 25 < /tmp/docker-mailserver-test/email-templates/existing-user2.txt" docker exec mail /bin/sh -c "nc 0.0.0.0 25 < /tmp/docker-mailserver-test/email-templates/existing-user3.txt" docker exec mail /bin/sh -c "nc 0.0.0.0 25 < /tmp/docker-mailserver-test/email-templates/existing-added.txt" docker exec mail /bin/sh -c "nc 0.0.0.0 25 < /tmp/docker-mailserver-test/email-templates/existing-user-and-cc-local-alias.txt" docker exec mail /bin/sh -c "nc 0.0.0.0 25 < /tmp/docker-mailserver-test/email-templates/existing-regexp-alias-external.txt" docker exec mail /bin/sh -c "nc 0.0.0.0 25 < /tmp/docker-mailserver-test/email-templates/existing-regexp-alias-local.txt" docker exec mail /bin/sh -c "nc 0.0.0.0 25 < /tmp/docker-mailserver-test/email-templates/existing-catchall-local.txt" docker exec mail /bin/sh -c "nc 0.0.0.0 25 < /tmp/docker-mailserver-test/email-templates/sieve-spam-folder.txt" docker exec mail /bin/sh -c "nc 0.0.0.0 25 < /tmp/docker-mailserver-test/email-templates/sieve-pipe.txt" docker exec mail /bin/sh -c "nc 0.0.0.0 25 < /tmp/docker-mailserver-test/email-templates/non-existing-user.txt" docker exec mail /bin/sh -c "sendmail root < /tmp/docker-mailserver-test/email-templates/root-email.txt" wait_for_empty_mail_queue_in_container mail } teardown_file() { docker rm -f mail } # # configuration checks # @test "checking configuration: user-patches.sh executed" { run docker logs mail assert_output --partial "Default user-patches.sh successfully executed" } @test "checking configuration: hostname/domainname" { run docker run "${IMAGE_NAME:?}" assert_success } # # processes # @test "checking process: postfix" { run docker exec mail /bin/bash -c "ps aux --forest | grep -v grep | grep '/usr/lib/postfix/sbin/master'" assert_success } @test "checking process: clamd" { run docker exec mail /bin/bash -c "ps aux --forest | grep -v grep | grep '/usr/sbin/clamd'" assert_success } @test "checking process: new" { run docker exec mail /bin/bash -c "ps aux --forest | grep -v grep | grep '/usr/sbin/amavisd-new'" assert_success } @test "checking process: opendkim" { run docker exec mail /bin/bash -c "ps aux --forest | grep -v grep | grep '/usr/sbin/opendkim'" assert_success } @test "checking process: opendmarc" { run docker exec mail /bin/bash -c "ps aux --forest | grep -v grep | grep '/usr/sbin/opendmarc'" assert_success } @test "checking process: fail2ban (disabled in default configuration)" { run docker exec mail /bin/bash -c "ps aux --forest | grep -v grep | grep '/usr/bin/python3 /usr/bin/fail2ban-server'" assert_failure } @test "checking process: fetchmail (disabled in default configuration)" { run docker exec mail /bin/bash -c "ps aux --forest | grep -v grep | grep '/usr/bin/fetchmail'" assert_failure } # # imap # @test "checking process: dovecot imaplogin (enabled in default configuration)" { run docker exec mail /bin/bash -c "ps aux --forest | grep -v grep | grep '/usr/sbin/dovecot'" assert_success } @test "checking imap: server is ready with STARTTLS" { run docker exec mail /bin/bash -c "nc -w 2 0.0.0.0 143 | grep '* OK' | grep 'STARTTLS' | grep 'ready'" assert_success } @test "checking imap: authentication works" { run docker exec mail /bin/sh -c "nc -w 1 0.0.0.0 143 < /tmp/docker-mailserver-test/auth/imap-auth.txt" assert_success } @test "checking imap: added user authentication works" { run docker exec mail /bin/sh -c "nc -w 1 0.0.0.0 143 < /tmp/docker-mailserver-test/auth/added-imap-auth.txt" assert_success } # # sasl # @test "checking sasl: doveadm auth test works with good password" { run docker exec mail /bin/sh -c "doveadm auth test -x service=smtp user2@otherdomain.tld mypassword | grep 'auth succeeded'" assert_success } @test "checking sasl: doveadm auth test fails with bad password" { run docker exec mail /bin/sh -c "doveadm auth test -x service=smtp user2@otherdomain.tld BADPASSWORD | grep 'auth failed'" assert_success } @test "checking sasl: sasl_passwd exists" { run docker exec mail [ -f /etc/postfix/sasl_passwd ] assert_success } # # logs # @test "checking logs: mail related logs should be located in a subdirectory" { run docker exec mail /bin/sh -c "ls -1 /var/log/mail/ | grep -E 'clamav|freshclam|mail.log'|wc -l" assert_success assert_output 3 } # # smtp # @test "checking smtp: authentication works with good password (plain)" { run docker exec mail /bin/sh -c "nc -w 5 0.0.0.0 25 < /tmp/docker-mailserver-test/auth/smtp-auth-plain.txt | grep 'Authentication successful'" assert_success } @test "checking smtp: authentication fails with wrong password (plain)" { run docker exec mail /bin/sh -c "nc -w 20 0.0.0.0 25 < /tmp/docker-mailserver-test/auth/smtp-auth-plain-wrong.txt" assert_output --partial 'authentication failed' assert_success } @test "checking smtp: authentication works with good password (login)" { run docker exec mail /bin/sh -c "nc -w 5 0.0.0.0 25 < /tmp/docker-mailserver-test/auth/smtp-auth-login.txt | grep 'Authentication successful'" assert_success } @test "checking smtp: authentication fails with wrong password (login)" { run docker exec mail /bin/sh -c "nc -w 20 0.0.0.0 25 < /tmp/docker-mailserver-test/auth/smtp-auth-login-wrong.txt" assert_output --partial 'authentication failed' assert_success } @test "checking smtp: added user authentication works with good password (plain)" { run docker exec mail /bin/sh -c "nc -w 5 0.0.0.0 25 < /tmp/docker-mailserver-test/auth/added-smtp-auth-plain.txt | grep 'Authentication successful'" assert_success } @test "checking smtp: added user authentication fails with wrong password (plain)" { run docker exec mail /bin/sh -c "nc -w 20 0.0.0.0 25 < /tmp/docker-mailserver-test/auth/added-smtp-auth-plain-wrong.txt | grep 'authentication failed'" assert_success } @test "checking smtp: added user authentication works with good password (login)" { run docker exec mail /bin/sh -c "nc -w 5 0.0.0.0 25 < /tmp/docker-mailserver-test/auth/added-smtp-auth-login.txt | grep 'Authentication successful'" assert_success } @test "checking smtp: added user authentication fails with wrong password (login)" { run docker exec mail /bin/sh -c "nc -w 20 0.0.0.0 25 < /tmp/docker-mailserver-test/auth/added-smtp-auth-login-wrong.txt | grep 'authentication failed'" assert_success } # TODO add a test covering case SPAMASSASSIN_SPAM_TO_INBOX=1 (default) @test "checking smtp: delivers mail to existing account" { run docker exec mail /bin/sh -c "grep 'postfix/lmtp' /var/log/mail/mail.log | grep 'status=sent' | grep ' Saved)' | sed 's/.* to= 6 1 , orig_to= 1 , orig_to= 1 2 1 EOF } @test "checking smtp: delivers mail to existing alias" { run docker exec mail /bin/sh -c "grep 'to=, orig_to=' /var/log/mail/mail.log | grep 'status=sent' | wc -l" assert_success assert_output 1 } @test "checking smtp: delivers mail to existing alias with recipient delimiter" { run docker exec mail /bin/sh -c "grep 'to=, orig_to=' /var/log/mail/mail.log | grep 'status=sent' | wc -l" assert_success assert_output 1 run docker exec mail /bin/sh -c "grep 'to=' /var/log/mail/mail.log | grep 'status=bounced'" assert_failure } @test "checking smtp: delivers mail to existing catchall" { run docker exec mail /bin/sh -c "grep 'to=, orig_to=' /var/log/mail/mail.log | grep 'status=sent' | wc -l" assert_success assert_output 1 } @test "checking smtp: delivers mail to regexp alias" { run docker exec mail /bin/sh -c "grep 'to=, orig_to=' /var/log/mail/mail.log | grep 'status=sent' | wc -l" assert_success assert_output 1 } @test "checking smtp: user1 should have received 9 mails" { run docker exec mail /bin/sh -c "grep Subject /var/mail/localhost.localdomain/user1/new/* | sed 's/.*Subject: //g' | sed 's/\.txt.*//g' | sed 's/VIRUS.*/VIRUS/g' | sort" assert_success # 9 messages, the virus mail has three subject lines cat <<'EOF' | assert_output Root Test Message Test Message amavis-virus Test Message amavis-virus Test Message existing-alias-external Test Message existing-alias-recipient-delimiter Test Message existing-catchall-local Test Message existing-regexp-alias-local Test Message existing-user-and-cc-local-alias Test Message existing-user1 Test Message sieve-spam-folder VIRUS EOF } @test "checking smtp: rejects mail to unknown user" { run docker exec mail /bin/sh -c "grep ': Recipient address rejected: User unknown in virtual mailbox table' /var/log/mail/mail.log | wc -l" assert_success assert_output 1 } @test "checking smtp: redirects mail to external aliases" { run docker exec mail /bin/sh -c "grep -- '-> ' /var/log/mail/mail.log* | grep RelayedInbound | wc -l" assert_success assert_output 2 } # TODO add a test covering case SPAMASSASSIN_SPAM_TO_INBOX=1 (default) @test "checking smtp: rejects spam" { run docker exec mail /bin/sh -c "grep 'Blocked SPAM' /var/log/mail/mail.log | grep external.tld=spam@my-domain.com | wc -l" assert_success assert_output 1 } @test "checking smtp: rejects virus" { run docker exec mail /bin/sh -c "grep 'Blocked INFECTED' /var/log/mail/mail.log | grep external.tld=virus@my-domain.com | wc -l" assert_success assert_output 1 } @test "checking smtp: not advertising smtputf8" { # Dovecot does not support SMTPUTF8, so while we can send we cannot receive # Better disable SMTPUTF8 support entirely if we can't handle it correctly run docker exec mail /bin/sh -c "nc 0.0.0.0 25 < /tmp/docker-mailserver-test/email-templates/smtp-ehlo.txt | grep SMTPUTF8 | wc -l" assert_success assert_output 0 } # # accounts # @test "checking accounts: user accounts" { run docker exec mail doveadm user '*' assert_success assert_line --index 0 "user1@localhost.localdomain" assert_line --index 1 "user2@otherdomain.tld" assert_line --index 2 "user3@localhost.localdomain" assert_line --index 3 "added@localhost.localdomain" } @test "checking accounts: user mail folder for user1" { run docker exec mail /bin/bash -c "ls -d /var/mail/localhost.localdomain/user1" assert_success } @test "checking accounts: user mail folder for user2" { run docker exec mail /bin/bash -c "ls -d /var/mail/otherdomain.tld/user2" assert_success } @test "checking accounts: user mail folder for user3" { run docker exec mail /bin/bash -c "ls -d /var/mail/localhost.localdomain/user3/mail" assert_success } @test "checking accounts: user mail folder for added user" { run docker exec mail /bin/bash -c "ls -d /var/mail/localhost.localdomain/added" assert_success } @test "checking accounts: comments are not parsed" { run docker exec mail /bin/bash -c "ls /var/mail | grep 'comment'" assert_failure } # # postfix # @test "checking postfix: vhost file is correct" { run docker exec mail cat /etc/postfix/vhost assert_success assert_line --index 0 "localdomain2.com" assert_line --index 1 "localhost.localdomain" assert_line --index 2 "otherdomain.tld" } @test "checking postfix: main.cf overrides" { run docker exec mail grep -q 'max_idle = 600s' /tmp/docker-mailserver/postfix-main.cf assert_success run docker exec mail grep -q 'readme_directory = /tmp' /tmp/docker-mailserver/postfix-main.cf assert_success } @test "checking postfix: master.cf overrides" { run docker exec mail grep -q 'submission/inet/smtpd_sasl_security_options=noanonymous' /tmp/docker-mailserver/postfix-master.cf assert_success } # # dovecot # @test "checking dovecot: config additions" { run docker exec mail grep -q 'mail_max_userip_connections = 69' /tmp/docker-mailserver/dovecot.cf assert_success run docker exec mail /bin/sh -c "doveconf | grep 'mail_max_userip_connections = 69'" assert_success assert_output 'mail_max_userip_connections = 69' } # # spamassassin # @test "checking spamassassin: should be listed in amavis when enabled" { run docker exec mail /bin/sh -c "grep -i 'ANTI-SPAM-SA code' /var/log/mail/mail.log | grep 'NOT loaded'" assert_failure } @test "checking spamassassin: all registered domains should see spam headers" { run docker exec mail /bin/sh -c "grep -ir 'X-Spam-' /var/mail/localhost.localdomain/user1/new" assert_success run docker exec mail /bin/sh -c "grep -ir 'X-Spam-' /var/mail/otherdomain.tld/user2/new" assert_success } # # ClamAV # @test "checking ClamAV: should be listed in amavis when enabled" { run docker exec mail grep -i 'Found secondary av scanner ClamAV-clamscan' /var/log/mail/mail.log assert_success } @test "checking ClamAV: CLAMAV_MESSAGE_SIZE_LIMIT" { run docker exec mail grep -q '^MaxFileSize 30M$' /etc/clamav/clamd.conf assert_success } # # postsrsd # @test "checking SRS: main.cf entries" { run docker exec mail grep "sender_canonical_maps = tcp:localhost:10001" /etc/postfix/main.cf assert_success run docker exec mail grep "sender_canonical_classes = envelope_sender" /etc/postfix/main.cf assert_success run docker exec mail grep "recipient_canonical_maps = tcp:localhost:10002" /etc/postfix/main.cf assert_success run docker exec mail grep "recipient_canonical_classes = envelope_recipient,header_recipient" /etc/postfix/main.cf assert_success } @test "checking SRS: postsrsd running" { run docker exec mail /bin/sh -c "ps aux | grep ^postsrsd" assert_success } @test "checking SRS: fallback to hostname is handled correctly" { run docker exec mail grep "SRS_DOMAIN=my-domain.com" /etc/default/postsrsd assert_success } # # system # @test "checking system: freshclam cron is enabled" { run docker exec mail bash -c "grep '/usr/bin/freshclam' -r /etc/cron.d" assert_success } @test "checking amavis: virusmail wiper cron exists" { run docker exec mail bash -c "crontab -l | grep '/usr/local/bin/virus-wiper'" assert_success } @test "checking amavis: VIRUSMAILS_DELETE_DELAY override works as expected" { # shellcheck disable=SC2016 run docker run --rm -e VIRUSMAILS_DELETE_DELAY=2 "${IMAGE_NAME:?}" /bin/bash -c 'echo "${VIRUSMAILS_DELETE_DELAY}"' assert_output 2 } @test "checking amavis: old virusmail is wipped by cron" { docker exec mail bash -c 'touch -d "`date --date=2000-01-01`" /var/lib/amavis/virusmails/should-be-deleted' run docker exec mail bash -c '/usr/local/bin/virus-wiper' assert_success run docker exec mail bash -c 'ls -la /var/lib/amavis/virusmails/ | grep should-be-deleted' assert_failure } @test "checking amavis: recent virusmail is not wipped by cron" { docker exec mail bash -c 'touch -d "`date`" /var/lib/amavis/virusmails/should-not-be-deleted' run docker exec mail bash -c '/usr/local/bin/virus-wiper' assert_success run docker exec mail bash -c 'ls -la /var/lib/amavis/virusmails/ | grep should-not-be-deleted' assert_success } @test "checking system: /var/log/mail/mail.log is error free" { run docker exec mail grep 'non-null host address bits in' /var/log/mail/mail.log assert_failure run docker exec mail grep 'mail system configuration error' /var/log/mail/mail.log assert_failure run docker exec mail grep ': error:' /var/log/mail/mail.log assert_failure run docker exec mail grep -i 'is not writable' /var/log/mail/mail.log assert_failure run docker exec mail grep -i 'permission denied' /var/log/mail/mail.log assert_failure run docker exec mail grep -i '(!)connect' /var/log/mail/mail.log assert_failure run docker exec mail grep -i 'backwards-compatible default setting chroot=y' /var/log/mail/mail.log assert_failure run docker exec mail grep -i 'connect to 127.0.0.1:10023: Connection refused' /var/log/mail/mail.log assert_failure } @test "checking system: /var/log/auth.log is error free" { run docker exec mail grep 'Unable to open env file: /etc/default/locale' /var/log/auth.log assert_failure } @test "checking system: sets the server fqdn" { run docker exec mail hostname assert_success assert_output "mail.my-domain.com" } @test "checking system: sets the server domain name in /etc/mailname" { run docker exec mail cat /etc/mailname assert_success assert_output "my-domain.com" } @test "checking system: postfix should not log to syslog" { run docker exec mail grep 'postfix' /var/log/syslog assert_failure } @test "checking system: amavis decoders installed and available" { run docker exec mail /bin/sh -c "grep -E '.*(Internal decoder|Found decoder) for\s+\..*' /var/log/mail/mail.log*|grep -Eo '(mail|Z|gz|bz2|xz|lzma|lrz|lzo|lz4|rpm|cpio|tar|deb|rar|arj|arc|zoo|doc|cab|tnef|zip|kmz|7z|jar|swf|lha|iso|exe)' | sort | uniq" assert_success # Support for doc and zoo removed in buster cat <<'EOF' | assert_output 7z Z arc arj bz2 cab cpio deb exe gz iso jar kmz lha lrz lz4 lzma lzo mail rar rpm swf tar tnef xz zip EOF } # # sieve # @test "checking sieve: user1 should have received 1 email in folder INBOX.spam" { run docker exec mail /bin/sh -c "ls -A /var/mail/localhost.localdomain/user1/.INBOX.spam/new | wc -l" assert_success assert_output 1 } @test "checking manage sieve: server is ready when ENABLE_MANAGESIEVE has been set" { run docker exec mail /bin/bash -c "nc -z 0.0.0.0 4190" assert_success } @test "checking sieve: user2 should have piped 1 email to /tmp/" { run docker exec mail /bin/sh -c "ls -A /tmp/pipe-test.out | wc -l" assert_success assert_output 1 } @test "checking sieve global: user1 should have gotten a copy of his spam mail" { run docker exec mail /bin/sh -c "grep 'Spambot ' -R /var/mail/localhost.localdomain/user1/new/" assert_success } # # accounts # @test "checking accounts: user_without_domain creation should be rejected since user@domain format is required" { run docker exec mail /bin/sh -c "addmailuser user_without_domain mypassword" assert_failure assert_output --partial "Username must include the domain" } @test "checking accounts: user3 should have been added to /tmp/docker-mailserver/postfix-accounts.cf" { docker exec mail /bin/sh -c "addmailuser user3@domain.tld mypassword" run docker exec mail /bin/sh -c "grep '^user3@domain\.tld|' -i /tmp/docker-mailserver/postfix-accounts.cf" assert_success [[ -n ${output} ]] } @test "checking accounts: auser3 should have been added to /tmp/docker-mailserver/postfix-accounts.cf" { docker exec mail /bin/sh -c "addmailuser auser3@domain.tld mypassword" run docker exec mail /bin/sh -c "grep '^auser3@domain\.tld|' -i /tmp/docker-mailserver/postfix-accounts.cf" assert_success [[ -n ${output} ]] } @test "checking accounts: a.ser3 should have been added to /tmp/docker-mailserver/postfix-accounts.cf" { docker exec mail /bin/sh -c "addmailuser a.ser3@domain.tld mypassword" run docker exec mail /bin/sh -c "grep '^a\.ser3@domain\.tld|' -i /tmp/docker-mailserver/postfix-accounts.cf" assert_success [[ -n ${output} ]] } @test "checking accounts: user3 should have been removed from /tmp/docker-mailserver/postfix-accounts.cf but not auser3" { docker exec mail /bin/sh -c "delmailuser -y user3@domain.tld" run docker exec mail /bin/sh -c "grep '^user3@domain\.tld' -i /tmp/docker-mailserver/postfix-accounts.cf" assert_failure [[ -z ${output} ]] run docker exec mail /bin/sh -c "grep '^auser3@domain\.tld' -i /tmp/docker-mailserver/postfix-accounts.cf" assert_success [[ -n ${output} ]] } @test "checking user updating password for user in /tmp/docker-mailserver/postfix-accounts.cf" { docker exec mail /bin/sh -c "addmailuser user4@domain.tld mypassword" initialpass=$(docker exec mail /bin/sh -c "grep '^user4@domain\.tld' -i /tmp/docker-mailserver/postfix-accounts.cf") sleep 2 docker exec mail /bin/sh -c "updatemailuser user4@domain.tld mynewpassword" sleep 2 changepass=$(docker exec mail /bin/sh -c "grep '^user4@domain\.tld' -i /tmp/docker-mailserver/postfix-accounts.cf") [[ ${initialpass} != "${changepass}" ]] docker exec mail /bin/sh -c "delmailuser -y auser3@domain.tld" assert_success } @test "checking accounts: listmailuser (quotas disabled)" { run docker exec mail /bin/sh -c "echo 'ENABLE_QUOTAS=0' >> /etc/dms-settings && listmailuser | head -n 1" assert_success assert_output '* user1@localhost.localdomain' } @test "checking accounts: listmailuser (quotas enabled)" { run docker exec mail /bin/sh -c "sed -i '/ENABLE_QUOTAS=0/d' /etc/dms-settings; listmailuser | head -n 1" assert_success assert_output '* user1@localhost.localdomain ( 12K / ~ ) [0%]' } @test "checking accounts: no error is generated when deleting a user if /tmp/docker-mailserver/postfix-accounts.cf is missing" { run docker run --rm \ -v "$(duplicate_config_for_container without-accounts/ without-accounts-deleting-user)":/tmp/docker-mailserver/ \ "${IMAGE_NAME:?}" /bin/sh -c 'delmailuser -y user3@domain.tld' assert_success [[ -z ${output} ]] } @test "checking accounts: user3 should have been added to /tmp/docker-mailserver/postfix-accounts.cf even when that file does not exist" { local PRIVATE_CONFIG PRIVATE_CONFIG=$(duplicate_config_for_container without-accounts/ without-accounts_file_does_not_exist) run docker run --rm \ -v "${PRIVATE_CONFIG}/without-accounts/":/tmp/docker-mailserver/ \ "${IMAGE_NAME:?}" /bin/sh -c 'addmailuser user3@domain.tld mypassword' assert_success run docker run --rm \ -v "${PRIVATE_CONFIG}/without-accounts/":/tmp/docker-mailserver/ \ "${IMAGE_NAME:?}" /bin/sh -c 'grep user3@domain.tld -i /tmp/docker-mailserver/postfix-accounts.cf' assert_success [[ -n ${output} ]] } @test "checking quota: setquota user must be existing" { run docker exec mail /bin/sh -c "addmailuser quota_user@domain.tld mypassword" assert_success run docker exec mail /bin/sh -c "setquota quota_user 50M" assert_failure run docker exec mail /bin/sh -c "setquota quota_user@domain.tld 50M" assert_success run docker exec mail /bin/sh -c "setquota username@fulldomain 50M" assert_failure run docker exec mail /bin/sh -c "delmailuser -y quota_user@domain.tld" assert_success } @test "checking quota: setquota must be well formatted" { run docker exec mail /bin/sh -c "addmailuser quota_user@domain.tld mypassword" assert_success run docker exec mail /bin/sh -c "setquota quota_user@domain.tld 26GIGOTS" assert_failure run docker exec mail /bin/sh -c "setquota quota_user@domain.tld 123" assert_failure run docker exec mail /bin/sh -c "setquota quota_user@domain.tld M" assert_failure run docker exec mail /bin/sh -c "setquota quota_user@domain.tld -60M" assert_failure run docker exec mail /bin/sh -c "setquota quota_user@domain.tld 10B" assert_success run docker exec mail /bin/sh -c "setquota quota_user@domain.tld 10k" assert_success run docker exec mail /bin/sh -c "setquota quota_user@domain.tld 10M" assert_success run docker exec mail /bin/sh -c "setquota quota_user@domain.tld 10G" assert_success run docker exec mail /bin/sh -c "setquota quota_user@domain.tld 10T" assert_success run docker exec mail /bin/sh -c "delmailuser -y quota_user@domain.tld" assert_success } @test "checking quota: delquota user must be existing" { run docker exec mail /bin/sh -c "addmailuser quota_user@domain.tld mypassword" assert_success run docker exec mail /bin/sh -c "delquota uota_user@domain.tld" assert_failure run docker exec mail /bin/sh -c "delquota quota_user" assert_failure run docker exec mail /bin/sh -c "delquota dontknowyou@domain.tld" assert_failure run docker exec mail /bin/sh -c "setquota quota_user@domain.tld 10T" assert_success run docker exec mail /bin/sh -c "delquota quota_user@domain.tld" assert_success run docker exec mail /bin/sh -c "grep -i 'quota_user@domain.tld' /tmp/docker-mailserver/dovecot-quotas.cf" assert_failure run docker exec mail /bin/sh -c "delmailuser -y quota_user@domain.tld" assert_success } @test "checking quota: delquota allow when no quota for existing user" { run docker exec mail /bin/sh -c "addmailuser quota_user@domain.tld mypassword" assert_success run docker exec mail /bin/sh -c "grep -i 'quota_user@domain.tld' /tmp/docker-mailserver/dovecot-quotas.cf" assert_failure run docker exec mail /bin/sh -c "delquota quota_user@domain.tld" assert_success run docker exec mail /bin/sh -c "delquota quota_user@domain.tld" assert_success run docker exec mail /bin/sh -c "delmailuser -y quota_user@domain.tld" assert_success } @test "checking quota: dovecot quota present in postconf" { run docker exec mail /bin/bash -c "postconf | grep 'check_policy_service inet:localhost:65265'" assert_success } @test "checking quota: dovecot mailbox max size must be equal to postfix mailbox max size" { postfix_mailbox_size=$(docker exec mail sh -c "postconf | grep -Po '(?<=mailbox_size_limit = )[0-9]+'") run echo "${postfix_mailbox_size}" refute_output "" # dovecot relies on virtual_mailbox_size by default postfix_virtual_mailbox_size=$(docker exec mail sh -c "postconf | grep -Po '(?<=virtual_mailbox_limit = )[0-9]+'") assert_equal "${postfix_virtual_mailbox_size}" "${postfix_mailbox_size}" postfix_mailbox_size_mb=$(( postfix_mailbox_size / 1000000)) dovecot_mailbox_size_mb=$(docker exec mail sh -c "doveconf | grep -oP '(?<=quota_rule \= \*\:storage=)[0-9]+'") run echo "${dovecot_mailbox_size_mb}" refute_output "" assert_equal "${postfix_mailbox_size_mb}" "${dovecot_mailbox_size_mb}" } @test "checking quota: dovecot message max size must be equal to postfix messsage max size" { postfix_message_size=$(docker exec mail sh -c "postconf | grep -Po '(?<=message_size_limit = )[0-9]+'") run echo "${postfix_message_size}" refute_output "" postfix_message_size_mb=$(( postfix_message_size / 1000000)) dovecot_message_size_mb=$(docker exec mail sh -c "doveconf | grep -oP '(?<=quota_max_mail_size = )[0-9]+'") run echo "${dovecot_message_size_mb}" refute_output "" assert_equal "${postfix_message_size_mb}" "${dovecot_message_size_mb}" } @test "checking quota: quota directive is removed when mailbox is removed" { run docker exec mail /bin/sh -c "addmailuser quserremoved@domain.tld mypassword" assert_success run docker exec mail /bin/sh -c "setquota quserremoved@domain.tld 12M" assert_success run docker exec mail /bin/sh -c 'cat /tmp/docker-mailserver/dovecot-quotas.cf | grep -E "^quserremoved@domain.tld\:12M\$" | wc -l | grep 1' assert_success run docker exec mail /bin/sh -c "delmailuser -y quserremoved@domain.tld" assert_success run docker exec mail /bin/sh -c 'cat /tmp/docker-mailserver/dovecot-quotas.cf | grep -E "^quserremoved@domain.tld\:12M\$"' assert_failure } @test "checking quota: dovecot applies user quota" { wait_for_changes_to_be_detected_in_container mail run docker exec mail /bin/sh -c "doveadm quota get -u 'user1@localhost.localdomain' | grep 'User quota STORAGE'" assert_output --partial "- 0" run docker exec mail /bin/sh -c "setquota user1@localhost.localdomain 50M" assert_success wait_for_changes_to_be_detected_in_container mail # wait until quota has been updated run repeat_until_success_or_timeout 20 sh -c "docker exec mail sh -c 'doveadm quota get -u user1@localhost.localdomain | grep -oP \"(User quota STORAGE\s+[0-9]+\s+)51200(.*)\"'" assert_success run docker exec mail /bin/sh -c "delquota user1@localhost.localdomain" assert_success wait_for_changes_to_be_detected_in_container mail # wait until quota has been updated run repeat_until_success_or_timeout 20 sh -c "docker exec mail sh -c 'doveadm quota get -u user1@localhost.localdomain | grep -oP \"(User quota STORAGE\s+[0-9]+\s+)-(.*)\"'" assert_success } @test "checking quota: warn message received when quota exceeded" { skip 'disabled as it fails randomly: https://github.com/docker-mailserver/docker-mailserver/pull/2511' wait_for_changes_to_be_detected_in_container mail # create user run docker exec mail /bin/sh -c "addmailuser quotauser@otherdomain.tld mypassword && setquota quotauser@otherdomain.tld 10k" assert_success wait_for_changes_to_be_detected_in_container mail # wait until quota has been updated run repeat_until_success_or_timeout 20 sh -c "docker exec mail sh -c 'doveadm quota get -u quotauser@otherdomain.tld | grep -oP \"(User quota STORAGE\s+[0-9]+\s+)10(.*)\"'" assert_success # dovecot and postfix has been restarted wait_for_service mail postfix wait_for_service mail dovecot sleep 10 # send some big emails run docker exec mail /bin/sh -c "nc 0.0.0.0 25 < /tmp/docker-mailserver-test/email-templates/quota-exceeded.txt" assert_success run docker exec mail /bin/sh -c "nc 0.0.0.0 25 < /tmp/docker-mailserver-test/email-templates/quota-exceeded.txt" assert_success run docker exec mail /bin/sh -c "nc 0.0.0.0 25 < /tmp/docker-mailserver-test/email-templates/quota-exceeded.txt" assert_success # check for quota warn message existence run repeat_until_success_or_timeout 20 sh -c "docker exec mail sh -c 'grep \"Subject: quota warning\" /var/mail/otherdomain.tld/quotauser/new/ -R'" assert_success run repeat_until_success_or_timeout 20 sh -c "docker logs mail | grep 'Quota exceeded (mailbox for user is full)'" assert_success # ensure only the first big message and the warn message are present (other messages are rejected: mailbox is full) run docker exec mail sh -c 'ls /var/mail/otherdomain.tld/quotauser/new/ | wc -l' assert_success assert_output "2" run docker exec mail /bin/sh -c "delmailuser -y quotauser@otherdomain.tld" assert_success } # # PERMIT_DOCKER mynetworks # @test "checking PERMIT_DOCKER: can get container ip" { run docker exec mail /bin/sh -c "ip addr show eth0 | grep 'inet ' | sed 's/[^0-9\.\/]*//g' | cut -d '/' -f 1 | egrep '[[:digit:]]{1,3}\.[[:digit:]]{1,3}\.[[:digit:]]{1,3}\.[[:digit:]]{1,3}'" assert_success } @test "checking PERMIT_DOCKER: my network value" { run docker exec mail /bin/sh -c "postconf | grep '^mynetworks =' | egrep '[[:digit:]]{1,3}\.[[:digit:]]{1,3}\.0\.0/16'" assert_success } # # amavis # @test "checking amavis: config overrides" { run docker exec mail /bin/sh -c "grep 'Test Verification' /etc/amavis/conf.d/50-user | wc -l" assert_success assert_output 1 } # TODO investigate why this test fails @test "checking user login: predefined user can login" { skip 'disabled as it fails randomly: https://github.com/docker-mailserver/docker-mailserver/pull/2177' run docker exec mail /bin/bash -c "doveadm auth test -x service=smtp pass@localhost.localdomain 'may be \\a \`p^a.*ssword' | grep 'passdb'" assert_output "passdb: pass@localhost.localdomain auth succeeded" } # ----------------------------------------------- # --- setup.sh ---------------------------------- # ----------------------------------------------- @test "checking setup.sh: show usage when no arguments provided" { run ./setup.sh assert_success assert_output --partial "This is the main administration script that you use for all your interactions with" } @test "checking setup.sh: exit with error when wrong arguments provided" { run ./setup.sh lol troll assert_failure assert_line --index 0 --partial "The command 'lol troll' is invalid." } @test "checking setup.sh: setup.sh email add and login" { wait_for_service mail changedetector assert_success run ./setup.sh -c mail email add setup_email_add@example.com test_password assert_success value=$(grep setup_email_add@example.com "$(private_config_path mail)/postfix-accounts.cf" | awk -F '|' '{print $1}') [[ ${value} == "setup_email_add@example.com" ]] assert_success wait_for_changes_to_be_detected_in_container mail wait_for_service mail postfix wait_for_service mail dovecot sleep 5 run docker exec mail /bin/bash -c "doveadm auth test -x service=smtp setup_email_add@example.com 'test_password' | grep 'passdb'" assert_output "passdb: setup_email_add@example.com auth succeeded" } @test "checking setup.sh: setup.sh email list" { run ./setup.sh -c mail email list assert_success } @test "checking setup.sh: setup.sh email update" { run ./setup.sh -c mail email add lorem@impsum.org test_test assert_success initialpass=$(grep lorem@impsum.org "$(private_config_path mail)/postfix-accounts.cf" | awk -F '|' '{print $2}') [[ ${initialpass} != "" ]] assert_success run ./setup.sh -c mail email update lorem@impsum.org my password assert_success updatepass=$(grep lorem@impsum.org "$(private_config_path mail)/postfix-accounts.cf" | awk -F '|' '{print $2}') [[ ${updatepass} != "" ]] [[ ${initialpass} != "${updatepass}" ]] docker exec mail doveadm pw -t "${updatepass}" -p 'my password' | grep 'verified' assert_success } @test "checking setup.sh: setup.sh email del" { run ./setup.sh -c mail email del -y lorem@impsum.org assert_success # TODO # delmailuser does not work as expected. # Its implementation is not functional, you cannot delete a user data # directory in the running container by running a new docker container # and not mounting the mail folders (persistance is broken). # The add script is only adding the user to account file. # run docker exec mail ls /var/mail/impsum.org/lorem # assert_failure run grep lorem@impsum.org "$(private_config_path mail)/postfix-accounts.cf" assert_failure } @test "checking setup.sh: setup.sh email restrict" { run ./setup.sh -c mail email restrict assert_failure run ./setup.sh -c mail email restrict add assert_failure ./setup.sh -c mail email restrict add send lorem@impsum.org run ./setup.sh -c mail email restrict list send assert_output --regexp "^lorem@impsum.org.*REJECT" run ./setup.sh -c mail email restrict del send lorem@impsum.org assert_success run ./setup.sh -c mail email restrict list send assert_output --partial "Everyone is allowed" ./setup.sh -c mail email restrict add receive rec_lorem@impsum.org run ./setup.sh -c mail email restrict list receive assert_output --regexp "^rec_lorem@impsum.org.*REJECT" run ./setup.sh -c mail email restrict del receive rec_lorem@impsum.org assert_success } # alias @test "checking setup.sh: setup.sh alias list" { run ./setup.sh -c mail alias list assert_success assert_output --partial "alias1@localhost.localdomain user1@localhost.localdomain" assert_output --partial "@localdomain2.com user1@localhost.localdomain" } @test "checking setup.sh: setup.sh alias add" { ./setup.sh -c mail alias add alias@example.com target1@forward.com ./setup.sh -c mail alias add alias@example.com target2@forward.com ./setup.sh -c mail alias add alias2@example.org target3@forward.com sleep 5 run grep "alias@example.com target1@forward.com,target2@forward.com" "$(private_config_path mail)/postfix-virtual.cf" assert_success } @test "checking setup.sh: setup.sh alias del" { ./setup.sh -c mail alias del alias@example.com target1@forward.com run grep "target1@forward.com" "$(private_config_path mail)/postfix-virtual.cf" assert_failure run grep "target2@forward.com" "$(private_config_path mail)/postfix-virtual.cf" assert_output "alias@example.com target2@forward.com" ./setup.sh -c mail alias del alias@example.org target2@forward.com run grep "alias@example.org" "$(private_config_path mail)/postfix-virtual.cf" assert_failure run grep "alias2@example.org" "$(private_config_path mail)/postfix-virtual.cf" assert_success ./setup.sh -c mail alias del alias2@example.org target3@forward.com run grep "alias2@example.org" "$(private_config_path mail)/postfix-virtual.cf" assert_failure } # quota @test "checking setup.sh: setup.sh setquota" { run ./setup.sh -c mail email add quota_user@example.com test_password run ./setup.sh -c mail email add quota_user2@example.com test_password run ./setup.sh -c mail quota set quota_user@example.com 12M assert_success run ./setup.sh -c mail quota set 51M quota_user@example.com assert_failure run ./setup.sh -c mail quota set unknown@domain.com 150M assert_failure run ./setup.sh -c mail quota set quota_user2 51M assert_failure run /bin/sh -c 'cat ./test/duplicate_configs/mail/dovecot-quotas.cf | grep -E "^quota_user@example.com\:12M\$" | wc -l | grep 1' assert_success run ./setup.sh -c mail quota set quota_user@example.com 26M assert_success run /bin/sh -c 'cat ./test/duplicate_configs/mail/dovecot-quotas.cf | grep -E "^quota_user@example.com\:26M\$" | wc -l | grep 1' assert_success run grep "quota_user2@example.com" ./test/duplicate_configs/mail/dovecot-quotas.cf assert_failure } @test "checking setup.sh: setup.sh delquota" { run ./setup.sh -c mail email add quota_user@example.com test_password run ./setup.sh -c mail email add quota_user2@example.com test_password run ./setup.sh -c mail quota set quota_user@example.com 12M assert_success run /bin/sh -c 'cat ./test/duplicate_configs/mail/dovecot-quotas.cf | grep -E "^quota_user@example.com\:12M\$" | wc -l | grep 1' assert_success run ./setup.sh -c mail quota del unknown@domain.com assert_failure run /bin/sh -c 'cat ./test/duplicate_configs/mail/dovecot-quotas.cf | grep -E "^quota_user@example.com\:12M\$" | wc -l | grep 1' assert_success run ./setup.sh -c mail quota del quota_user@example.com assert_success run grep "quota_user@example.com" ./test/duplicate_configs/mail/dovecot-quotas.cf assert_failure } @test "checking setup.sh: setup.sh config dkim help correctly displayed" { run ./setup.sh -c mail config dkim help assert_success assert_line --index 3 --partial " open-dkim - configure DomainKeys Identified Mail (DKIM)" } # debug @test "checking setup.sh: setup.sh debug fetchmail" { run ./setup.sh -c mail debug fetchmail assert_failure assert_output --partial "fetchmail: normal termination, status 11" } @test "checking setup.sh: setup.sh debug login ls" { run ./setup.sh -c mail debug login ls assert_success } @test "checking setup.sh: setup.sh relay add-domain" { ./setup.sh -c mail relay add-domain example1.org smtp.relay1.com 2525 ./setup.sh -c mail relay add-domain example2.org smtp.relay2.com ./setup.sh -c mail relay add-domain example3.org smtp.relay3.com 2525 ./setup.sh -c mail relay add-domain example3.org smtp.relay.com 587 # check adding run /bin/sh -c "cat $(private_config_path mail)/postfix-relaymap.cf | grep -e \"^@example1.org\s\+\[smtp.relay1.com\]:2525\" | wc -l | grep 1" assert_success # test default port run /bin/sh -c "cat $(private_config_path mail)/postfix-relaymap.cf | grep -e \"^@example2.org\s\+\[smtp.relay2.com\]:25\" | wc -l | grep 1" assert_success # test modifying run /bin/sh -c "cat $(private_config_path mail)/postfix-relaymap.cf | grep -e \"^@example3.org\s\+\[smtp.relay.com\]:587\" | wc -l | grep 1" assert_success } @test "checking setup.sh: setup.sh relay add-auth" { ./setup.sh -c mail relay add-auth example.org smtp_user smtp_pass ./setup.sh -c mail relay add-auth example2.org smtp_user2 smtp_pass2 ./setup.sh -c mail relay add-auth example2.org smtp_user2 smtp_pass_new # test adding run /bin/sh -c "cat $(private_config_path mail)/postfix-sasl-password.cf | grep -e \"^@example.org\s\+smtp_user:smtp_pass\" | wc -l | grep 1" assert_success # test updating run /bin/sh -c "cat $(private_config_path mail)/postfix-sasl-password.cf | grep -e \"^@example2.org\s\+smtp_user2:smtp_pass_new\" | wc -l | grep 1" assert_success } @test "checking setup.sh: setup.sh relay exclude-domain" { ./setup.sh -c mail relay exclude-domain example.org run /bin/sh -c "cat $(private_config_path mail)/postfix-relaymap.cf | grep -e \"^@example.org\s*$\" | wc -l | grep 1" assert_success } # # LDAP # # postfix @test "checking dovecot: postmaster address" { run docker exec mail /bin/sh -c "grep 'postmaster_address = postmaster@my-domain.com' /etc/dovecot/conf.d/15-lda.conf" assert_success } @test "checking spoofing: rejects sender forging" { # checking rejection of spoofed sender wait_for_smtp_port_in_container_to_respond mail run docker exec mail /bin/sh -c "nc 0.0.0.0 25 < /tmp/docker-mailserver-test/auth/added-smtp-auth-spoofed.txt" assert_output --partial 'Sender address rejected: not owned by user' } @test "checking spoofing: accepts sending as alias" { run docker exec mail /bin/sh -c "nc 0.0.0.0 25 < /tmp/docker-mailserver-test/auth/added-smtp-auth-spoofed-alias.txt | grep 'End data with'" assert_success } # # Pflogsumm delivery check # @test "checking pflogsum delivery" { # checking logrotation working and report being sent docker exec mail logrotate --force /etc/logrotate.d/maillog sleep 10 run docker exec mail grep "Subject: Postfix Summary for " /var/mail/localhost.localdomain/user1/new/ -R assert_success # check sender is the one specified in REPORT_SENDER run docker exec mail grep "From: report1@mail.my-domain.com" /var/mail/localhost.localdomain/user1/new/ -R assert_success # check sender is not the default one. run docker exec mail grep "From: mailserver-report@mail.my-domain.com" /var/mail/localhost.localdomain/user1/new/ -R assert_failure } # # supervisor # @test "checking restart of process: postfix" { run docker exec mail /bin/bash -c "pkill master && sleep 10 && ps aux --forest | grep -v grep | grep '/usr/lib/postfix/sbin/master'" assert_success } @test "checking restart of process: clamd" { run docker exec mail /bin/bash -c "pkill clamd && sleep 10 && ps aux --forest | grep -v grep | grep '/usr/sbin/clamd'" assert_success } @test "checking restart of process: amavisd-new" { run docker exec mail /bin/bash -c "pkill amavi && sleep 12 && ps aux --forest | grep -v grep | grep '/usr/sbin/amavisd-new (master)'" assert_success } @test "checking restart of process: opendkim" { run docker exec mail /bin/bash -c "pkill opendkim && sleep 10 && ps aux --forest | grep -v grep | grep '/usr/sbin/opendkim'" assert_success } @test "checking restart of process: opendmarc" { run docker exec mail /bin/bash -c "pkill opendmarc && sleep 10 && ps aux --forest | grep -v grep | grep '/usr/sbin/opendmarc'" assert_success } # # root mail delivery # @test "checking that mail for root was delivered" { run docker exec mail grep "Subject: Root Test Message" /var/mail/localhost.localdomain/user1/new/ -R assert_success }