Skip to content

SSL/TLS

There are multiple options to enable SSL:

After installation, you can test your setup with:

To enable Let's Encrypt on your mail server, you have to:

  • Get your certificate using letsencrypt client
  • Add an environment variable SSL_TYPE with value letsencrypt (see docker-compose.yml)
  • Mount your whole letsencrypt folder to /etc/letsencrypt
  • The certs folder name located in letsencrypt/live/ must be the fqdn of your container responding to the hostname command. The fqdn (full qualified domain name) inside the docker container is built combining the hostname and domainname values of the docker-compose file, eg:

    services:
      mailserver:
        hostname: mail
        domainname: myserver.tld
        fqdn: mail.myserver.tld
    

You don't have anything else to do. Enjoy.

Example using Docker for Let's Encrypt

  1. Make a directory to store your letsencrypt logs and configs. In my case:

    mkdir -p /home/ubuntu/docker/letsencrypt 
    cd /home/ubuntu/docker/letsencrypt
    
  2. Now get the certificate (modify mail.myserver.tld) and following the certbot instructions.

  3. This will need access to port 80 from the internet, adjust your firewall if needed:

    docker run --rm -it \
      -v $PWD/log/:/var/log/letsencrypt/ \
      -v $PWD/etc/:/etc/letsencrypt/ \
      -p 80:80 \
      certbot/certbot certonly --standalone -d mail.myserver.tld
    
  4. You can now mount /home/ubuntu/docker/letsencrypt/etc/ in /etc/letsencrypt of docker-mailserver.

    To renew your certificate just run (this will need access to port 443 from the internet, adjust your firewall if needed):

    docker run --rm -it \
      -v $PWD/log/:/var/log/letsencrypt/ \
      -v $PWD/etc/:/etc/letsencrypt/ \
      -p 80:80 \
      -p 443:443 \
      certbot/certbot renew
    

Example using Docker, nginx-proxy and letsencrypt-nginx-proxy-companion

If you are running a web server already, it is non-trivial to generate a Let's Encrypt certificate for your mail server using certbot, because port 80 is already occupied. In the following example, we show how docker-mailserver can be run alongside the docker containers nginx-proxy and letsencrypt-nginx-proxy-companion.

There are several ways to start nginx-proxy and letsencrypt-nginx-proxy-companion. Any method should be suitable here.

For example start nginx-proxy as in the letsencrypt-nginx-proxy-companion documentation:

docker run --detach \
  --name nginx-proxy \
  --restart always \
  --publish 80:80 \
  --publish 443:443 \
  --volume /server/letsencrypt/etc:/etc/nginx/certs:ro \
  --volume /etc/nginx/vhost.d \
  --volume /usr/share/nginx/html \
  --volume /var/run/docker.sock:/tmp/docker.sock:ro \
  jwilder/nginx-proxy

Then start nginx-proxy-letsencrypt:

docker run --detach \
  --name nginx-proxy-letsencrypt \
  --restart always \
  --volume /server/letsencrypt/etc:/etc/nginx/certs:rw \
  --volumes-from nginx-proxy \
  --volume /var/run/docker.sock:/var/run/docker.sock:ro \
  jrcs/letsencrypt-nginx-proxy-companion

Start the rest of your web server containers as usual.

Start another container for your mail.myserver.tld. This will generate a Let's Encrypt certificate for your domain, which can be used by docker-mailserver. It will also run a web server on port 80 at that address:

docker run -d \
  --name webmail \
  -e "VIRTUAL_HOST=mail.myserver.tld" \
  -e "LETSENCRYPT_HOST=mail.myserver.tld" \
  -e "LETSENCRYPT_EMAIL=foo@bar.com" \
  library/nginx

You may want to add -e LETSENCRYPT_TEST=true to the above while testing to avoid the Let's Encrypt certificate generation rate limits.

Finally, start the mailserver with the docker-compose.yml. Make sure your mount path to the letsencrypt certificates is correct.

Inside your /path/to/mailserver/docker-compose.yml (for the mailserver from this repo) make sure volumes look like below example:

volumes:
  - maildata:/var/mail
  - mailstate:/var/mail-state
  - ./config/:/tmp/docker-mailserver/
  - /server/letsencrypt/etc:/etc/letsencrypt/live

Then: /path/to/mailserver/docker-compose up -d mail

Example using Docker, nginx-proxy and letsencrypt-nginx-proxy-companion with docker-compose

The following docker-compose.yml is the basic setup you need for using letsencrypt-nginx-proxy-companion. It is mainly derived from its own wiki/documenation.

Example Code
version: "2"

services:
  nginx: 
    image: nginx
    container_name: nginx
    ports:
      - 80:80
      - 443:443
    volumes:
      - /mnt/data/nginx/htpasswd:/etc/nginx/htpasswd
      - /mnt/data/nginx/conf.d:/etc/nginx/conf.d
      - /mnt/data/nginx/vhost.d:/etc/nginx/vhost.d
      - /mnt/data/nginx/html:/usr/share/nginx/html
      - /mnt/data/nginx/certs:/etc/nginx/certs:ro
    networks:
      - proxy-tier
    restart: always

  nginx-gen:
    image: jwilder/docker-gen
    container_name: nginx-gen
    volumes:
      - /var/run/docker.sock:/tmp/docker.sock:ro
      - /mnt/data/nginx/templates/nginx.tmpl:/etc/docker-gen/templates/nginx.tmpl:ro
    volumes_from:
      - nginx
    entrypoint: /usr/local/bin/docker-gen -notify-sighup nginx -watch -wait 5s:30s /etc/docker-gen/templates/nginx.tmpl /etc/nginx/conf.d/default.conf
    restart: always

  letsencrypt-nginx-proxy-companion:
    image: jrcs/letsencrypt-nginx-proxy-companion
    container_name: letsencrypt-companion
    volumes_from:
      - nginx
    volumes:
      - /var/run/docker.sock:/var/run/docker.sock:ro
      - /mnt/data/nginx/certs:/etc/nginx/certs:rw
    environment:
      - NGINX_DOCKER_GEN_CONTAINER=nginx-gen
      - DEBUG=false
    restart: always

networks:
  proxy-tier:
    external:
      name: nginx-proxy

The second part of the setup is the actual mail container. So, in another folder, create another docker-compose.yml with the following content (Removed all ENV variables for this example):

Example Code
version: '2'
services:
  mailserver:
    image: mailserver/docker-mailserver:latest
    hostname: <HOSTNAME> # <-- change this
    domainname: <DOMAINNAME> # <-- change this
    container_name: mailserver
    ports:
      - "25:25"
      - "143:143"
      - "465:465"
      - "587:587"
      - "993:993"
    volumes:
      - ./mail:/var/mail
      - ./mail-state:/var/mail-state
      - ./config/:/tmp/docker-mailserver/
      - /mnt/data/nginx/certs/:/etc/letsencrypt/live/:ro
    cap_add:
      - NET_ADMIN
      - SYS_PTRACE
    restart: always

  cert-companion:
    image: nginx
    environment:
      - "VIRTUAL_HOST="
      - "VIRTUAL_NETWORK=nginx-proxy"
      - "LETSENCRYPT_HOST="
      - "LETSENCRYPT_EMAIL="
    networks:
      - proxy-tier
    restart: always

networks:
  proxy-tier:
    external:
      name: nginx-proxy

The mail container needs to have the letsencrypt certificate folder mounted as a volume. No further changes are needed. The second container is a dummy-sidecar we need, because the mail-container do not expose any web-ports. Set your ENV variables as you need. (VIRTUAL_HOST and LETSENCRYPT_HOST are mandandory, see documentation)

Example using the Let's Encrypt Certificates on a Synology NAS

Version 6.2 and later of the Synology NAS DSM OS now come with an interface to generate and renew letencrypt certificates. Navigation into your DSM control panel and go to Security, then click on the tab Certificate to generate and manage letsencrypt certificates.

Amongst other things, you can use these to secure your mail server. DSM locates the generated certificates in a folder below /usr/syno/etc/certificate/_archive/.

Navigate to that folder and note the 6 character random folder name of the certificate you'd like to use. Then, add the following to your docker-compose.yml declaration file:

volumes:
  - /usr/syno/etc/certificate/_archive/<your-folder>/:/tmp/ssl
environment:
  - SSL_TYPE=manual
  - SSL_CERT_PATH=/tmp/ssl/fullchain.pem
  - SSL_KEY_PATH=/tmp/ssl/privkey.pem

DSM-generated letsencrypt certificates get auto-renewed every three months.

Caddy

If you are using Caddy to renew your certificates, please note that only RSA certificates work. Read #1440 for details. In short for Caddy v1 the Caddyfile should look something like:

https://mail.domain.com {
  tls yourcurrentemail@gmail.com {
    key_type rsa2048
  }
}

For Caddy v2 you can specify the key_type in your server's global settings, which would end up looking something like this if you're using a Caddyfile:

{
  debug
  admin localhost:2019
  http_port 80
  https_port 443
  default_sni mywebserver.com
  key_type rsa4096
}

If you are instead using a json config for Caddy v2, you can set it in your site's TLS automation policies:

Example Code
{
  "apps": {
    "http": {
      "servers": {
        "srv0": {
          "listen": [
            ":443"
          ],
          "routes": [
            {
              "match": [
                {
                  "host": [
                    "mail.domain.com",
                  ]
                }
              ],
              "handle": [
                {
                  "handler": "subroute",
                  "routes": [
                    {
                      "handle": [
                        {
                          "body": "",
                          "handler": "static_response"
                        }
                      ]
                    }
                  ]
                }
              ],
              "terminal": true
            },
          ]
        }
      }
    },
    "tls": {
      "automation": {
        "policies": [
          {
            "subjects": [
              "mail.domain.com",
            ],
            "key_type": "rsa2048",
            "issuer": {
              "email": "email@email.com",
              "module": "acme"
            }
          },
          {
            "issuer": {
              "email": "email@email.com",
              "module": "acme"
            }
          }
        ]
      }
    }
  }
}

The generated certificates can be mounted:

volumes:
  - ${CADDY_DATA_DIR}/certificates/acme-v02.api.letsencrypt.org-directory/mail.domain.com/mail.domain.com.crt:/etc/letsencrypt/live/mail.domain.com/fullchain.pem
  - ${CADDY_DATA_DIR}/certificates/acme-v02.api.letsencrypt.org-directory/mail.domain.com/mail.domain.com.key:/etc/letsencrypt/live/mail.domain.com/privkey.pem

EC certificates fail in the TLS handshake:

CONNECTED(00000003)
140342221178112:error:14094410:SSL routines:ssl3_read_bytes:sslv3 alert handshake failure:ssl/record/rec_layer_s3.c:1543:SSL alert number 40
no peer certificate available
No client certificate CA names sent

Traefik v2

Traefik is an open-source application proxy using the ACME protocol. Traefik can request certificates for domains and subdomains, and it will take care of renewals, challenge negotiations, etc. We strongly recommend to use Traefik's major version 2.

Traefik's storage format is natively supported if the acme.json store is mounted into the container at /etc/letsencrypt/acme.json. The file is also monitored for changes and will trigger a reload of the mail services. Wild card certificates issued for *.domain.tld are supported. You will then want to use SSL_DOMAIN=domain.tld. Lookup of the certificate domain happens in the following order:

  1. ${SSL_DOMAIN}
  2. ${HOSTNAME}
  3. ${DOMAINNAME}

This setup only comes with one caveat: The domain has to be configured on another service for Traefik to actually request it from Let'sEncrypt, i.e. Traefik will not issue a certificate without a service / router demanding it.

Example Code

Here is an example setup for docker-compose:

version: '3.8'

services:

  mailserver:
    image: docker.io/mailserver/docker-mailserver:latest
    container_name: mailserver
    hostname: mail
    domainname: domain.tld
    volumes:
       - /traefik/acme.json:/etc/letsencrypt/acme.json:ro
    environment:
      SSL_TYPE: letsencrypt
      SSL_DOMAIN: mail.example.com"
      # for a wildcard certificate, use
      # SSL_DOMAIN: example.com

  traefik:
    image: docker.io/traefik:v2.4.8
    ports:
       - "80:80"
       - "443:443"
    command:
       - --providers.docker
       - --entrypoints.http.address=:80
       - --entrypoints.http.http.redirections.entryPoint.to=https
       - --entrypoints.http.http.redirections.entryPoint.scheme=https
       - --entrypoints.https.address=:443
       - --entrypoints.https.http.tls.certResolver=letsencrypt
       - --certificatesresolvers.letsencrypt.acme.email=admin@domain.tld
       - --certificatesresolvers.letsencrypt.acme.storage=/acme.json
       - --certificatesresolvers.letsencrypt.acme.httpchallenge.entrypoint=http
    volumes:
       - /traefik/acme.json:/acme.json
       - /var/run/docker.sock:/var/run/docker.sock:ro

  whoami:
    image: docker.io/traefik/whoami:latest 
    labels:
       - "traefik.http.routers.whoami.rule=Host(`mail.domain.tld`)"

Self-Signed Certificates

Warning

Use self-signed certificates only for testing purposes!

This feature requires you to provide the following files into your config/ssl/ directory (internal location: /tmp/docker-mailserver/ssl/):

  • ${HOSTNAME}-key.pem
  • ${HOSTNAME}-cert.pem
  • demoCA/cacert.pem

Where ${HOSTNAME} is the mailserver FQDN (hostname(mail) + domainname(example.com), eg: mail.example.com).

To use the certificate:

  • Add SSL_TYPE=self-signed to your container environment variables.
  • If a matching certificate (files listed above) is found in config/ssl, it will be automatically setup in postfix and dovecot. You just have to place them in config/ssl folder.

Generating a self-signed certificate

Note

Since v10, support in setup.sh for generating a self-signed SSL certificate internally was removed.

It is now similar to SSL_TYPE=manual (except manual does not support verification for a custom CA), but does not require additional ENV vars for providing the location of cert files.

One way to generate self-signed certificates is with Smallstep's step CLI. This is exactly what docker-mailserver does for creating test certificates.

For example with the FQDN mail.example.test, you can generate the required files by running:

#! /bin/sh
mkdir -p demoCA

step certificate create "Smallstep Root CA" "demoCA/cacert.pem" "demoCA/cakey.pem" \
  --no-password --insecure \
  --profile root-ca \
  --not-before "2021-01-01T00:00:00+00:00" \
  --not-after "2031-01-01T00:00:00+00:00" \
  --san "example.test" \
  --san "mail.example.test" \
  --kty RSA --size 2048

step certificate create "Smallstep Leaf" mail.example.test-cert.pem mail.example.test-key.pem \
  --no-password --insecure \
  --profile leaf \
  --ca "demoCA/cacert.pem" \
  --ca-key "demoCA/cakey.pem" \
  --not-before "2021-01-01T00:00:00+00:00" \
  --not-after "2031-01-01T00:00:00+00:00" \
  --san "example.test" \
  --san "mail.example.test" \
  --kty RSA --size 2048

If you'd rather not install the CLI tool locally to run the step commands above; you can save the script above to a file such as generate-certs.sh (and make it executable chmod +x generate-certs.sh) in a directory that you want the certs to be placed, then run that script with docker:

# --user to keep ownership of the files to your user and group ID
docker run --rm -it \
  --user "$(id -u):$(id -g)" \
  --volume "${PWD}:/tmp" \
  --workdir "/tmp" \
  --entrypoint "/tmp/generate-certs.sh" \
  smallstep/step-ca

Custom Certificate Files

You can also provide your own certificate files. Add these entries to your docker-compose.yml:

volumes:
  - /etc/ssl:/tmp/ssl:ro
environment:
  - SSL_TYPE=manual
  - SSL_CERT_PATH=/tmp/ssl/cert/public.crt
  - SSL_KEY_PATH=/tmp/ssl/private/private.key

This will mount the path where your ssl certificates reside as read-only under /tmp/ssl. Then all you have to do is to specify the location of your private key and the certificate.

Info

You may have to restart your mailserver once the certificates change.

Testing a Certificate is Valid

  • From your host:

    docker exec mail openssl s_client \
      -connect 0.0.0.0:25 \
      -starttls smtp \
      -CApath /etc/ssl/certs/
    
  • Or:

    docker exec mail openssl s_client \
      -connect 0.0.0.0:143 \
      -starttls imap \
      -CApath /etc/ssl/certs/
    

And you should see the certificate chain, the server certificate and: Verify return code: 0 (ok)

In addition, to verify certificate dates:

docker exec mail openssl s_client \
  -connect 0.0.0.0:25 \
  -starttls smtp \
  -CApath /etc/ssl/certs/ \
  2>/dev/null | openssl x509 -noout -dates

Plain-Text Access

Warning

Not recommended for purposes other than testing.

Add this to config/dovecot.cf:

ssl = yes
disable_plaintext_auth=no

These options in conjunction mean:

  • SSL/TLS is offered to the client, but the client isn't required to use it.
  • The client is allowed to login with plaintext authentication even when SSL/TLS isn't enabled on the connection.
  • This is insecure, because the plaintext password is exposed to the internet.

Importing Certificates Obtained via Another Source

If you have another source for SSL/TLS certificates you can import them into the server via an external script. The external script can be found here: external certificate import script.

The steps to follow are these:

  1. Transport the new certificates to ./config/ssl (/tmp/ssl in the container)
  2. You should provide fullchain.key and privkey.pem
  3. Place the script in ./config/ (or /tmp/docker-mailserver/ inside the container)
  4. Make the script executable (chmod +x tomav-renew-certs.sh)
  5. Run the script: docker exec mail /tmp/docker-mailserver/tomav-renew-certs.sh

If an error occurs the script will inform you. If not you will see both postfix and dovecot restart.

After the certificates have been loaded you can check the certificate:

openssl s_client \
  -servername mail.mydomain.net \
  -connect 192.168.0.72:465 \
  2>/dev/null | openssl x509

# or

openssl s_client \
  -servername mail.mydomain.net \
  -connect mail.mydomain.net:465 \
  2>/dev/null | openssl x509

Or you can check how long the new certificate is valid with commands like:

export SITE_URL="mail.mydomain.net"
export SITE_IP_URL="192.168.0.72" # can also be `mail.mydomain.net`
export SITE_SSL_PORT="993" # imap port dovecot

##works: check if certificate will expire in two weeks 
#2 weeks is 1209600 seconds
#3 weeks is 1814400
#12 weeks is 7257600
#15 weeks is 9072000

certcheck_2weeks=`openssl s_client -connect ${SITE_IP_URL}:${SITE_SSL_PORT} \
  -servername ${SITE_URL} 2> /dev/null | openssl x509 -noout -checkend 1209600`

####################################
#notes: output can be
#Certificate will not expire
#Certificate will expire
####################

What does the script that imports the certificates do:

  1. Check if there are new certs in the /tmp/ssl folder.
  2. Check with the ssl cert fingerprint if they differ from the current certificates.
  3. If so it will copy the certs to the right places.
  4. And restart postfix and dovecot.

You can of course run the script by cron once a week or something. In that way you could automate cert renewal. If you do so it is probably wise to run an automated check on certificate expiry as well. Such a check could look something like this:

## code below will alert if certificate expires in less than two weeks
## please adjust varables! 
## make sure the mail -s command works! Test!

export SITE_URL="mail.mydomain.net"
export SITE_IP_URL="192.168.2.72" # can also be `mail.mydomain.net`
export SITE_SSL_PORT="993" # imap port dovecot
export ALERT_EMAIL_ADDR="bill@gates321boom.com"

certcheck_2weeks=`openssl s_client -connect ${SITE_IP_URL}:${SITE_SSL_PORT} \
  -servername ${SITE_URL} 2> /dev/null | openssl x509 -noout -checkend 1209600`

####################################
#notes: output can be
#Certificate will not expire
#Certificate will expire
####################

#echo "certcheck 2 weeks gives $certcheck_2weeks"

##automated check you might run by cron or something
## does tls/ssl certificate expire within two weeks?

if [ "$certcheck_2weeks" = "Certificate will not expire" ]; then
  echo "all is well, certwatch 2 weeks says $certcheck_2weeks"
  else
    echo "Cert seems to be expiring pretty soon, within two weeks: $certcheck_2weeks"
    echo "we will send an alert email and log as well"
    logger Certwatch: cert $SITE_URL will expire in two weeks
    echo "Certwatch: cert $SITE_URL will expire in two weeks" | mail -s "cert $SITE_URL expires in two weeks " $ALERT_EMAIL_ADDR 
fi