The message size limit was reduced in c8728eab from the postfix
default [1] of 10,240,000B = 10,000kiB = ~10MiB to only
1,048,576B = 1MiB. And the documentation claims that this would be 10MiB
instead of 1MiB.
Restore the old behaviour as default and fix the documentation as well.
[1]: http://www.postfix.org/postconf.5.html
* Add new configuration for multi-domain relay hosts (#922)
* Creates new environment variables (replacing existing AWS_SES variables)
* Optionally allows more advanced setups using config files
* Update relay hosts during change detection (#922)
* Add helper scripts for adding relay hosts and per-domain auth
* Allow the possibility to deliver some mail directly
* adding a domain with no destination will exclude it from the
relayhost_map and so Postfix will attempt to deliver the mail directly
* tests for setup.sh script
* tests for relay host configuration
* these tests cover the code in `start-mailserver.sh` dealing with both
the env vars and the configuration files
* Added dependencies, binary, startup configuration
* Added env variable to dist files/readme
* send summary after each logrotate, added env variable for mail/logrotate interval
* remove mail.log from rsyslogs logrotate
* rotate mail.log when no email is set
* Added documentation for POSTFIX_LOGROTATE_INTERVAL
* Removed interval option, since its not being tested for.
* changed test to force logrotate to rotate fixed logrotate config
* readded setup_environment, made logrotate_setup being called everytime
* changed documentation for new variable names - again
* Did Documentation, added a default recipient, added test for default config.
* layout fix
* changed variable names apposite the documentation
Added `/var/lib/dovecot/` to the list of folders that get persisted in `mailstate`. So the creation of `ssl-parameters.dat` has not to be done every restart again. This may only take some dozen seconds, but can be very long on systems with high load.
* update postmaster_address in dovecot config according to POSTMASTER_ADDRESS env var
* tests: add another test for postmaster_address with default settings
* remove two ciphers according to https://www.htbridge.com/ssl/ (NIST, HIPAA)
* added a switch via an environment variable to choose between modern and intermediate ciphers
* new setup.sh function, new tests, new script and some minor updates to main.cf
* fix for missing files
* removed obsolete test-files
* restart postfix if neccessary.
* see pr #845
* fixed typo
* fixed branchmixup
* changed postfix reload command & changed to operate on container instead of image
* reload postfix only on adding new restriction
* main.cf is only changed when user is added.
- Postfix reload changed
- working on container instead of image now in setup.sh
- added cleanup after tests
* moved cleanup to makefile
* Introduced Postscreen
cheaper, earlier and simpler blocking of zombies/spambots.
From http://postfix.cs.utah.edu/POSTSCREEN_README.html :
As a first layer, postscreen(8) blocks connections from zombies and other spambots that are responsible for about 90% of all spam. It is implemented as a single process to make this defense as cheap as possible.
Things we need to consider:
- Do we need a whitelist/backlist file? (http://postfix.cs.utah.edu/postconf.5.html#postscreen_access_list)
- Via introducing an optional config/postfix-access.cidr
- The only permanent whitelisting I could imagine are monitoring services(which might (still?) behave weird/hastely) or blacklisting backup servers(since no traffic should be coming from them anyway)
- Do we need deep inspections? They are desireable, but these tests are expensive: a good client must disconnect after it passes the test, before it can talk to a real Postfix SMTP server. Considered tests are:
- postscreen_bare_newline_enable (http://postfix.cs.utah.edu/postconf.5.html#postscreen_bare_newline_action)
- postscreen_non_smtp_command_enable (http://postfix.cs.utah.edu/postconf.5.html#postscreen_non_smtp_command_action)
- postscreen_pipelining_enable (http://postfix.cs.utah.edu/postconf.5.html#postscreen_pipelining_action)
- Do we need to make the blacklisting via dnsblocking configurable? It's currently set and weighted as follows, where a score of 3 results in blocking, a score of -1 results in whitelisting:
(*: adds the specified weight to the SMTP client's DNSBL score. Specify a negative number for whitelisting.)
(http://postfix.cs.utah.edu/postconf.5.html#postscreen_dnsbl_sites)
- zen.spamhaus.org*3
- bl.mailspike.net
- b.barracudacentral.org*2
- bl.spameatingmonkey.net
- bl.spamcop.net
- dnsbl.sorbs.net
- psbl.surriel.com
- list.dnswl.org=127.0.[0..255].0*-2
- list.dnswl.org=127.0.[0..255].1*-3
- list.dnswl.org=127.0.[0..255].[2..3]*-4
- What to do when blacklisting? I currently set it to drop. We could
- ignore: Ignore the failure of this test. Allow other tests to complete. Repeat this test the next time the client connects. This option is useful for testing and collecting statistics without blocking mail.
- enforce: Allow other tests to complete. Reject attempts to deliver mail with a 550 SMTP reply, and log the helo/sender/recipient information. Repeat this test the next time the client connects.
- drop: Drop the connection immediately with a 521 SMTP reply. Repeat this test the next time the client connects.
In the end I think we could drop postgrey support. Postscreen replaces postgrey in its entirety, while being more selective and not delaying mail. Especially if we consider using the deep inspection options of postscreen.
Hope that wasn't too much to read! ;)
* main.cf got misformatted..
Don't know how, should be ok now.
* fixed malformatted main.cf & repaired master.cf
* reenabled rbl stuff.. It's cached, therefore doesn't hurt
* fixed tests
* added tests, repaired tests, added info, introduced new Variable POSTSCREEN_ACTION, fixes
* install dovecot from backports
* dovecot 2.2.33 has a slightly different TLS-configuration than 2.2.27
* want to have both images a the same time
* make use of the /etc/dovecot/ssl as mkcert.sh (2.2.33) is using that folder for certs.
* Enable user definable fetchmail poll times
* create new ENV variable FETCHMAIL_POLL in target/start-mailserver.sh
* change --daemon setting in supervisor-app.conf to use ENV var
* Put FETCHMAIL_POLL env variable in Dockerfile to handle case where
user does not specify it in their docker-compose.yml
* installed supervisor. Still need to set tasks to run in foreground.
* setting programs to run in foreground
* seems to work now
* cleanup
* final fixes
* tests
* show startup output on stdout
* set Dovecot config files before starting it
* make all processes log to console
* Use the supervisor as the main process. The start-mailserver is started
from the supervisord and then this process triggers others.
Defined some default variable in the Dockerfile. In order for
supervisored to build the command lines the ENV variable need to be set.
Therefore the defaults are defined.
Some processes are not single processes like postfix and fail2ban and
they have a wrapper. The wrapper takes care of proper shutdown and checking
if the process is running or not. Supervisored will restart the wrapping
script if the process is gone.
Increased some delays between tests because sometimes they where to short
for all containers to be running.
* Remove obsolete comments, reset timeout value to old one, added new lines
* Add more time for analyzing the emails.
Sometimes it fails the tests and gives a wrong state about
the test. During testing 40 seconds was the safe value.
* Fix Dovecot Ldap Problems
* Fix typo within DEFAULT_VARS Definitions
* Fix wrong ldap hosts value within the bats test
* Fix override_config for strings containing &
* Fix erroneous removal of an conditional within the postfix override function
* Renamed Test 129, to be clear that this belongs to ldap
* Fix mail_with_ldap setting dn pass explicit
* Add 3 env variables for ldap: LDAP_QUERY_FILTER_{USER,GROUP,ALIAS}
* Update README.md
* Environment variable for spam subject tag
* Add SA_SPAM_SUBJECT to readme
* Add integration tests for spam subject tag
* Fix overwrite environment variable in config file
* First pass at adding support for pipe and filter in Sieve, excluding unit tests.
* Reduce insight into copied scripts
* Added test
* Adjustments related to switch to 16.04
* Fix#526: fatal: no SASL authentication mechanisms
When using the container with SMTP_ONLY = 1, then the container fails
on ehlo because there is no valid sasl authentication mechanism
available. This happens because sasl has been enabled within
postfix/main.cf per default but sasl is not configured.
To fix this _setup_postfix_sasl does not depend anymore on
ENABLE_SASLAUTHD and will check in it's logic, whether to enable sasl
or not within postfix/main.cf.
* Fix#526: fatal: no SASL authentication mechanisms
When using the container with SMTP_ONLY = 1, then the container fails
on ehlo because there is no valid sasl authentication mechanism
available. This happens because sasl has been enabled within
postfix/main.cf per default but sasl is not configured.
To fix this _setup_postfix_sasl does not depend anymore on
ENABLE_SASLAUTHD and will check in it's logic, whether to enable sasl
or not within postfix/main.cf.
* Fix test
* Add method overwrite_config()
This method takes 2 arguments:
1.) Environment Variable Prefix
2.) String of files separated by whitespace
e.g.
export LDAP_SEARCH_BASE=dc=domain,dc=loc
export LDAP_BIND_PW=test
overwrite_config "LDAP_" "/etc/postfix/ldap-users.cf
/etc/postfix/ldap-groups.cf"
Logic:
+ all env vars will be search for vars with the prefix LDAP_
+ afterwards they will be dissembled in key value pairs
LDAP_BIND_PW=test --> bind_pw test
+ the key and value will be substituted within the provided files
via sed
* Fix#503 added logic for custom configs provided at container
provisioning within /tmp/docker-mailserver
* Add additional unit tests for postfix ldap integration
* check custom configs copied
* check environment variables substituted
* Fix quoting problems in tests.bats
* Fix missing brackets in function _fix_var_amavis_permissions()
* Fix typo in _setup_ldap
* Fix notify in overwrite_config
* Fix typo
* Fix added dovecot ldap config provisioning again and Add notify for tasks
Moved variable VIRUSMAILS_DELETE_DELAY to Dockerfile. This variable will be written to /etc/environment in the start
script to make it visible to cron. Also removed echo in cron job to prevent sending mail for each run.
* Fixed wrong mail headers when using OVERRIDE_HOSTNAME by setting the the hostname explicitly
* Added tests and fixed hostname in dovecot conf
* Added missing tests
* Improved function naming and task notification message
Fix "/usr/local/bin/start-mailserver.sh: line 489: [: argument expected"
There are quotes missing around a shell variable. I added some more, too.
[ -z ] is okay, but [ a = b -a -z ] is not.
Signed-off-by: Wolfgang Ocker <weo@reccoware.de>
* Add #394: Postfix Virtual Transport
This makes it possible to specify a lmtp config file, by providing
POSTFIX_DAGENT.
Update - Readme with informations about #394
* Add Variable ENABLE_POSTFIX_VIRTUAL_TRANSPORT (task)
* Add Variable POSTFIX_DAGENT (section)
Added Unit tests for virtual transport
* Fix syntax error in test/tests.bats
* Fix Unit Test
* Removed DISABLE_AMAVIS
* Renamed DISABLE_* to ENABLE_* with 0 as default value. (this must be explicit)
* Added missing tests for ENABLE_*
* Improved readme and docker-compose example
Should fix#256 and #386
The provided default postfix master.cf overwrites the configs for
saslauthd within main.cf. To make saslauthd work, we have to comment or
in this case delete the lines from master.cf to make the given configs
in main.cf work.
Fail2ban doesn't seems to shutdown cleanly and leaves fail2ban.sock file that prevent it from starting after a container restart. That simple check should do the trick.
* Move ldap files to target dir
* Move ldap files to target dir
* Update start-mailser.sh to use copied files
* Add the domainname from container to vhost
* Fix unary operator error
* List dovecot users only when LDAP disabled
* Minor
This reverts commit e5d14fd0bc.
172.0.0.0-172.15.255.255 and 172.32.0.0-172.255.255.255 are valid
external IP addresses. Try PERMIT_DOCKER: network instead.
The letsencrypt-auto client creates cert.pem, chain.pem, fullchain.pem, and
privkey.pem in its default settings. The simp_le client creates cert.pem,
fullchain.pem, and key.pem in its default settings.
A check for either privkey.pem or key.pem was added.
The chain.pem file was only used by the letsencrypt code for the creation of
combined.pem, which is not used by either postfix or dovecot.
The code to create a combined.pem file for letsencrypt was removed, as was the
corresponding test.
* Adding the PERMIT_DOCKER option
See README.md for more informations
* Adding some test for PERMIT_DOCKER option
* Fix test cases
* Opendkim and Openmarc configuration
Fix docker network range
Adding opendkim and openmarc configuration
* Adding some options for tests
* Update log message
* Update tests
* Allow disabling amavis service
Setting the `DISABLE_AMAVIS=1` env var will skip the starting of the
amavis process.
* Enable option to not run spamassassin
Setting the `DISABLE_SPAMASSASSIN=1` env var will start this container
without spamassain.
* Allow starting of the container without clamav
Setting the `DISABLE_CLAMAV=1` env var will start this container without
starting clamav.
Changed Dockerfile to include a missing configuration file for dovecot (mailboxes).
Moved Postfix setup after DKIM/DMARC/SSL setup, near the override postfix setup.
Daniel Panteleit
Marius Panneck
Peter Hartmann
millerjason
olaf-mandel
Jiří Kozlovský
Birkenstab
Franz Keferböck
ixeft
Paul Adams
17Halbe
Marek Walczak
akmet
Benedict Endemann
Alexander Elbracht
Andreas Gerstmayr
Damian Moore
kamuri
Johan Smits
Darren McGrandle
Johan Smits
Daniel Panteleit
Thomas VIAL
alinmear
Richard Février
MadsRC
Arne Kepp
Michael Als
Thomas A. Kilian
mplx
Florian
Wolfgang Ocker
Sven Kauber
Kevin Crawley
Kai Ren
arcaine2
Dennis Stumm
Dennis Stumm
Pablo Castorino
Josef Friedrich
Zehir
bigpigeon
Morgan Kesler
Jack Twilley
Kyle Ondy
Dominik Winter
Thorsten von Eicken
André Stein
angus