docker-mailserver/target/scripts/helpers/ssl.sh

496 lines
22 KiB
Bash
Raw Normal View History

#! /bin/bash
function _setup_ssl
{
_log 'debug' 'Setting up SSL'
local POSTFIX_CONFIG_MAIN='/etc/postfix/main.cf'
local POSTFIX_CONFIG_MASTER='/etc/postfix/master.cf'
local DOVECOT_CONFIG_SSL='/etc/dovecot/conf.d/10-ssl.conf'
local TMP_DMS_TLS_PATH='/tmp/docker-mailserver/ssl' # config volume
local DMS_TLS_PATH='/etc/dms/tls'
mkdir -p "${DMS_TLS_PATH}"
# Primary certificate to serve for TLS
function _set_certificate
{
local POSTFIX_KEY_WITH_FULLCHAIN=${1}
local DOVECOT_KEY=${1}
local DOVECOT_CERT=${1}
# If a 2nd param is provided, a separate key and cert was received instead of a fullkeychain
if [[ -n ${2} ]]
then
local PRIVATE_KEY=$1
local CERT_CHAIN=$2
POSTFIX_KEY_WITH_FULLCHAIN="${PRIVATE_KEY} ${CERT_CHAIN}"
DOVECOT_KEY="${PRIVATE_KEY}"
DOVECOT_CERT="${CERT_CHAIN}"
fi
# Postfix configuration
# NOTE: `smtpd_tls_chain_files` expects private key defined before public cert chain
# Value can be a single PEM file, or a sequence of files; so long as the order is key->leaf->chain
sedfile -i -r "s|^(smtpd_tls_chain_files =).*|\1 ${POSTFIX_KEY_WITH_FULLCHAIN}|" "${POSTFIX_CONFIG_MAIN}"
# Dovecot configuration
sedfile -i -r \
-e "s|^(ssl_key =).*|\1 <${DOVECOT_KEY}|" \
-e "s|^(ssl_cert =).*|\1 <${DOVECOT_CERT}|" \
"${DOVECOT_CONFIG_SSL}"
}
# Enables supporting two certificate types such as ECDSA with an RSA fallback
function _set_alt_certificate
{
local COPY_KEY_FROM_PATH=$1
local COPY_CERT_FROM_PATH=$2
local PRIVATE_KEY_ALT="${DMS_TLS_PATH}/fallback_key"
local CERT_CHAIN_ALT="${DMS_TLS_PATH}/fallback_cert"
cp "${COPY_KEY_FROM_PATH}" "${PRIVATE_KEY_ALT}"
cp "${COPY_CERT_FROM_PATH}" "${CERT_CHAIN_ALT}"
chmod 600 "${PRIVATE_KEY_ALT}"
chmod 644 "${CERT_CHAIN_ALT}"
# Postfix configuration
# NOTE: This operation doesn't replace the line, it appends to the end of the line.
# Thus this method should only be used when this line has explicitly been replaced earlier in the script.
# Otherwise without `docker-compose down` first, a `docker-compose up` may
# persist previous container state and cause a failure in postfix configuration.
sedfile -i "s|^smtpd_tls_chain_files =.*|& ${PRIVATE_KEY_ALT} ${CERT_CHAIN_ALT}|" "${POSTFIX_CONFIG_MAIN}"
# Dovecot configuration
# Conditionally checks for `#`, in the event that internal container state is accidentally persisted,
# can be caused by: `docker-compose up` run again after a `ctrl+c`, without running `docker-compose down`
sedfile -i -r \
-e "s|^#?(ssl_alt_key =).*|\1 <${PRIVATE_KEY_ALT}|" \
-e "s|^#?(ssl_alt_cert =).*|\1 <${CERT_CHAIN_ALT}|" \
"${DOVECOT_CONFIG_SSL}"
}
function _apply_tls_level
{
local TLS_CIPHERS_ALLOW=$1
local TLS_PROTOCOL_IGNORE=$2
local TLS_PROTOCOL_MINIMUM=$3
# Postfix configuration
sed -i -r \
-e "s|^(smtpd?_tls_mandatory_protocols =).*|\1 ${TLS_PROTOCOL_IGNORE}|" \
-e "s|^(smtpd?_tls_protocols =).*|\1 ${TLS_PROTOCOL_IGNORE}|" \
-e "s|^(tls_high_cipherlist =).*|\1 ${TLS_CIPHERS_ALLOW}|" \
"${POSTFIX_CONFIG_MAIN}"
# Dovecot configuration (secure by default though)
sed -i -r \
-e "s|^(ssl_min_protocol =).*|\1 ${TLS_PROTOCOL_MINIMUM}|" \
-e "s|^(ssl_cipher_list =).*|\1 ${TLS_CIPHERS_ALLOW}|" \
"${DOVECOT_CONFIG_SSL}"
}
# 2020 feature intended for Traefik v2 support only:
# https://github.com/docker-mailserver/docker-mailserver/pull/1553
# Extracts files `key.pem` and `fullchain.pem`.
# `_extract_certs_from_acme` is located in `helpers/ssl.sh`
# NOTE: See the `SSL_TYPE=letsencrypt` case below for more details.
function _traefik_support
{
if [[ -f /etc/letsencrypt/acme.json ]]
then
# Variable only intended for troubleshooting via debug output
local EXTRACTED_DOMAIN
# Conditional handling depends on the success of `_extract_certs_from_acme`,
# Failure tries the next fallback FQDN to try extract a certificate from.
# Subshell not used in conditional to ensure extraction log output is still captured
if [[ -n ${SSL_DOMAIN} ]] && _extract_certs_from_acme "${SSL_DOMAIN}"
then
EXTRACTED_DOMAIN=('SSL_DOMAIN' "${SSL_DOMAIN}")
elif _extract_certs_from_acme "${HOSTNAME}"
then
EXTRACTED_DOMAIN=('HOSTNAME' "${HOSTNAME}")
elif _extract_certs_from_acme "${DOMAINNAME}"
then
EXTRACTED_DOMAIN=('DOMAINNAME' "${DOMAINNAME}")
else
_log 'warn' "letsencrypt (acme.json) failed to identify a certificate to extract"
fi
_log 'trace' "letsencrypt (acme.json) extracted certificate using ${EXTRACTED_DOMAIN[0]}: '${EXTRACTED_DOMAIN[1]}'"
fi
}
# TLS strength/level configuration
case "${TLS_LEVEL}" in
( "modern" )
local TLS_MODERN_SUITE='ECDHE-ECDSA-AES128-GCM-SHA256:ECDHE-RSA-AES128-GCM-SHA256:ECDHE-ECDSA-AES256-GCM-SHA384:ECDHE-RSA-AES256-GCM-SHA384:ECDHE-ECDSA-CHACHA20-POLY1305:ECDHE-RSA-CHACHA20-POLY1305:DHE-RSA-AES128-GCM-SHA256:DHE-RSA-AES256-GCM-SHA384'
local TLS_MODERN_IGNORE='!SSLv2,!SSLv3,!TLSv1,!TLSv1.1'
local TLS_MODERN_MIN='TLSv1.2'
_apply_tls_level "${TLS_MODERN_SUITE}" "${TLS_MODERN_IGNORE}" "${TLS_MODERN_MIN}"
_log 'debug' "TLS configured with 'modern' ciphers"
;;
( "intermediate" )
local TLS_INTERMEDIATE_SUITE='ECDHE-ECDSA-CHACHA20-POLY1305:ECDHE-RSA-CHACHA20-POLY1305:ECDHE-ECDSA-AES128-GCM-SHA256:ECDHE-RSA-AES128-GCM-SHA256:ECDHE-ECDSA-AES256-GCM-SHA384:ECDHE-RSA-AES256-GCM-SHA384:DHE-RSA-AES128-GCM-SHA256:DHE-RSA-AES256-GCM-SHA384:ECDHE-ECDSA-AES128-SHA256:ECDHE-RSA-AES128-SHA256:ECDHE-ECDSA-AES128-SHA:ECDHE-RSA-AES256-SHA384:ECDHE-RSA-AES128-SHA:ECDHE-ECDSA-AES256-SHA384:ECDHE-ECDSA-AES256-SHA:ECDHE-RSA-AES256-SHA:DHE-RSA-AES128-SHA256:DHE-RSA-AES128-SHA:DHE-RSA-AES256-SHA256:DHE-RSA-AES256-SHA'
local TLS_INTERMEDIATE_IGNORE='!SSLv2,!SSLv3'
local TLS_INTERMEDIATE_MIN='TLSv1'
_apply_tls_level "${TLS_INTERMEDIATE_SUITE}" "${TLS_INTERMEDIATE_IGNORE}" "${TLS_INTERMEDIATE_MIN}"
# Lowers the minimum acceptable TLS version connection to `TLSv1` (from Debian upstream `TLSv1.2`)
# Lowers Security Level to `1` (from Debian upstream `2`, openssl release defaults to `1`)
# https://www.openssl.org/docs/man1.1.1/man3/SSL_CTX_set_security_level.html
# https://wiki.debian.org/ContinuousIntegration/TriagingTips/openssl-1.1.1
# https://dovecot.org/pipermail/dovecot/2020-October/120225.html
# TODO: This is a fix for Debian Bullseye Dovecot. Can remove when we only support TLS >=1.2.
# WARNING: This applies to all processes that use openssl and respect these settings.
sedfile -i -r \
-e 's|^(MinProtocol).*|\1 = TLSv1|' \
-e 's|^(CipherString).*|\1 = DEFAULT@SECLEVEL=1|' \
/usr/lib/ssl/openssl.cnf
_log 'debug' "TLS configured with 'intermediate' ciphers"
;;
( * )
_log 'warn' "TLS_LEVEL '${TLS_LEVEL}' not valid"
;;
esac
local SCOPE_SSL_TYPE="TLS Setup [SSL_TYPE=${SSL_TYPE}]"
# SSL certificate Configuration
# TODO: Refactor this feature, it's been extended multiple times for specific inputs/providers unnecessarily.
# NOTE: Some `SSL_TYPE` logic uses mounted certs/keys directly, some make an internal copy either retaining filename or renaming.
case "${SSL_TYPE}" in
( "letsencrypt" )
_log 'debug' "Configuring SSL using 'letsencrypt'"
# `docker-mailserver` will only use one certificate from an FQDN folder in `/etc/letsencrypt/live/`.
# We iterate the sequence [SSL_DOMAIN, HOSTNAME, DOMAINNAME] to find a matching FQDN folder.
# This same sequence is used for the Traefik `acme.json` certificate extraction process, which outputs the FQDN folder.
#
# eg: If HOSTNAME (mail.example.test) doesn't exist, try DOMAINNAME (example.test).
# SSL_DOMAIN if set will take priority and is generally expected to have a wildcard prefix.
# SSL_DOMAIN will have any wildcard prefix stripped for the output FQDN folder it is stored in.
# TODO: A wildcard cert needs to be provisioned via Traefik to validate if acme.json contains any other value for `main` or `sans` beyond the wildcard.
#
# NOTE: HOSTNAME is set via `helpers/dns.sh`, it is not the original system HOSTNAME ENV anymore.
# TODO: SSL_DOMAIN is Traefik specific, it no longer seems relevant and should be considered for removal.
_traefik_support
# letsencrypt folders and files mounted in /etc/letsencrypt
local LETSENCRYPT_DOMAIN
local LETSENCRYPT_KEY
# Identify a valid letsencrypt FQDN folder to use.
if [[ -n ${SSL_DOMAIN} ]] && [[ -e /etc/letsencrypt/live/$(_strip_wildcard_prefix "${SSL_DOMAIN}")/fullchain.pem ]]
then
LETSENCRYPT_DOMAIN=$(_strip_wildcard_prefix "${SSL_DOMAIN}")
elif [[ -e /etc/letsencrypt/live/${HOSTNAME}/fullchain.pem ]]
then
LETSENCRYPT_DOMAIN=${HOSTNAME}
elif [[ -e /etc/letsencrypt/live/${DOMAINNAME}/fullchain.pem ]]
then
LETSENCRYPT_DOMAIN=${DOMAINNAME}
else
_log 'warn' "Cannot find a valid DOMAIN for '/etc/letsencrypt/live/<DOMAIN>/', tried: '${SSL_DOMAIN}', '${HOSTNAME}', '${DOMAINNAME}'"
dms_panic__misconfigured 'LETSENCRYPT_DOMAIN' "${SCOPE_SSL_TYPE}"
return 1
fi
# Verify the FQDN folder also includes a valid private key (`privkey.pem` for Certbot, `key.pem` for extraction by Traefik)
if [[ -e /etc/letsencrypt/live/${LETSENCRYPT_DOMAIN}/privkey.pem ]]
then
LETSENCRYPT_KEY='privkey'
elif [[ -e /etc/letsencrypt/live/${LETSENCRYPT_DOMAIN}/key.pem ]]
then
LETSENCRYPT_KEY='key'
else
_log 'warn' "Cannot find key file ('privkey.pem' or 'key.pem') in '/etc/letsencrypt/live/${LETSENCRYPT_DOMAIN}/'"
dms_panic__misconfigured 'LETSENCRYPT_KEY' "${SCOPE_SSL_TYPE}"
return 1
fi
# Update relevant config for Postfix and Dovecot
_log 'trace' "Adding ${LETSENCRYPT_DOMAIN} SSL certificate to the postfix and dovecot configuration"
# LetsEncrypt `fullchain.pem` and `privkey.pem` contents are detailed here from CertBot:
# https://certbot.eff.org/docs/using.html#where-are-my-certificates
# `key.pem` was added for `simp_le` support (2016): https://github.com/docker-mailserver/docker-mailserver/pull/288
# `key.pem` is also a filename used by the `_extract_certs_from_acme` method (implemented for Traefik v2 only)
local PRIVATE_KEY="/etc/letsencrypt/live/${LETSENCRYPT_DOMAIN}/${LETSENCRYPT_KEY}.pem"
local CERT_CHAIN="/etc/letsencrypt/live/${LETSENCRYPT_DOMAIN}/fullchain.pem"
_set_certificate "${PRIVATE_KEY}" "${CERT_CHAIN}"
_log 'trace' "SSL configured with 'letsencrypt' certificates"
;;
( "custom" ) # (hard-coded path) Use a private key with full certificate chain all in a single PEM file.
_log 'debug' "Adding ${HOSTNAME} SSL certificate"
# NOTE: Dovecot works fine still as both values are bundled into the keychain
local COMBINED_PEM_NAME="${HOSTNAME}-full.pem"
local TMP_KEY_WITH_FULLCHAIN="${TMP_DMS_TLS_PATH}/${COMBINED_PEM_NAME}"
local KEY_WITH_FULLCHAIN="${DMS_TLS_PATH}/${COMBINED_PEM_NAME}"
if [[ -f ${TMP_KEY_WITH_FULLCHAIN} ]]
then
cp "${TMP_KEY_WITH_FULLCHAIN}" "${KEY_WITH_FULLCHAIN}"
chmod 600 "${KEY_WITH_FULLCHAIN}"
_set_certificate "${KEY_WITH_FULLCHAIN}"
_log 'trace' "SSL configured with 'CA signed/custom' certificates"
else
dms_panic__no_file "${TMP_KEY_WITH_FULLCHAIN}" "${SCOPE_SSL_TYPE}"
fi
;;
( "manual" ) # (dynamic path via ENV) Use separate private key and cert/chain files (should be PEM encoded)
_log 'debug' "Configuring certificates using key ${SSL_KEY_PATH} and cert ${SSL_CERT_PATH}"
# Source files are copied internally to these destinations:
local PRIVATE_KEY="${DMS_TLS_PATH}/key"
local CERT_CHAIN="${DMS_TLS_PATH}/cert"
# Fail early:
if [[ -z ${SSL_KEY_PATH} ]] && [[ -z ${SSL_CERT_PATH} ]]
then
dms_panic__no_env 'SSL_KEY_PATH or SSL_CERT_PATH' "${SCOPE_SSL_TYPE}"
fi
if [[ -n ${SSL_ALT_KEY_PATH} ]] \
&& [[ -n ${SSL_ALT_CERT_PATH} ]] \
&& [[ ! -f ${SSL_ALT_KEY_PATH} ]] \
&& [[ ! -f ${SSL_ALT_CERT_PATH} ]]
then
dms_panic__no_file "(ALT) ${SSL_ALT_KEY_PATH} or ${SSL_ALT_CERT_PATH}" "${SCOPE_SSL_TYPE}"
fi
if [[ -f ${SSL_KEY_PATH} ]] && [[ -f ${SSL_CERT_PATH} ]]
then
cp "${SSL_KEY_PATH}" "${PRIVATE_KEY}"
cp "${SSL_CERT_PATH}" "${CERT_CHAIN}"
chmod 600 "${PRIVATE_KEY}"
chmod 644 "${CERT_CHAIN}"
_set_certificate "${PRIVATE_KEY}" "${CERT_CHAIN}"
# Support for a fallback certificate, useful for hybrid/dual ECDSA + RSA certs
if [[ -n ${SSL_ALT_KEY_PATH} ]] && [[ -n ${SSL_ALT_CERT_PATH} ]]
then
_log 'trace' "Configuring fallback certificates using key ${SSL_ALT_KEY_PATH} and cert ${SSL_ALT_CERT_PATH}"
_set_alt_certificate "${SSL_ALT_KEY_PATH}" "${SSL_ALT_CERT_PATH}"
else
# If the Dovecot settings for alt cert has been enabled (doesn't start with `#`),
# but required ENV var is missing, reset to disabled state:
sed -i -r \
-e 's|^(ssl_alt_key =).*|#\1 </path/to/alternative/key.pem|' \
-e 's|^(ssl_alt_cert =).*|#\1 </path/to/alternative/cert.pem|' \
"${DOVECOT_CONFIG_SSL}"
fi
_log 'trace' "SSL configured with 'Manual' certificates"
else
dms_panic__no_file "${SSL_KEY_PATH} or ${SSL_CERT_PATH}" "${SCOPE_SSL_TYPE}"
fi
;;
( "self-signed" ) # (hard-coded path) Use separate private key and cert/chain files (should be PEM encoded), expects self-signed CA
_log 'debug' "Adding ${HOSTNAME} SSL certificate"
local KEY_NAME="${HOSTNAME}-key.pem"
local CERT_NAME="${HOSTNAME}-cert.pem"
# Self-Signed source files:
local SS_KEY="${TMP_DMS_TLS_PATH}/${KEY_NAME}"
local SS_CERT="${TMP_DMS_TLS_PATH}/${CERT_NAME}"
local SS_CA_CERT="${TMP_DMS_TLS_PATH}/demoCA/cacert.pem"
# Source files are copied internally to these destinations:
local PRIVATE_KEY="${DMS_TLS_PATH}/${KEY_NAME}"
local CERT_CHAIN="${DMS_TLS_PATH}/${CERT_NAME}"
local CA_CERT="${DMS_TLS_PATH}/cacert.pem"
if [[ -f ${SS_KEY} ]] \
&& [[ -f ${SS_CERT} ]] \
&& [[ -f ${SS_CA_CERT} ]]
then
cp "${SS_KEY}" "${PRIVATE_KEY}"
cp "${SS_CERT}" "${CERT_CHAIN}"
chmod 600 "${PRIVATE_KEY}"
chmod 644 "${CERT_CHAIN}"
_set_certificate "${PRIVATE_KEY}" "${CERT_CHAIN}"
cp "${SS_CA_CERT}" "${CA_CERT}"
chmod 644 "${CA_CERT}"
# Have Postfix trust the self-signed CA (which is not installed within the OS trust store)
sedfile -i -r "s|^#?(smtpd?_tls_CAfile =).*|\1 ${CA_CERT}|" "${POSTFIX_CONFIG_MAIN}"
# Part of the original `self-signed` support, unclear why this symlink was required?
# May have been to support the now removed `Courier` (Dovecot replaced it):
# https://github.com/docker-mailserver/docker-mailserver/commit/1fb3aeede8ac9707cc9ea11d603e3a7b33b5f8d5
# smtp_tls_CApath and smtpd_tls_CApath both point to /etc/ssl/certs
local PRIVATE_CA="/etc/ssl/certs/cacert-${HOSTNAME}.pem"
ln -s "${CA_CERT}" "${PRIVATE_CA}"
_log 'trace' "SSL configured with 'self-signed' certificates"
else
dms_panic__no_file "${SS_KEY} or ${SS_CERT}" "${SCOPE_SSL_TYPE}"
fi
;;
( '' ) # No SSL/TLS certificate used/required, plaintext auth permitted over insecure connections
_log 'warn' "(INSECURE!) SSL configured with plain text access. DO NOT USE FOR PRODUCTION DEPLOYMENT."
# Untested. Not officially supported.
# Postfix configuration:
# smtp_tls_security_level (default: 'may', amavis 'none' x2) | http://www.postfix.org/postconf.5.html#smtp_tls_security_level
# '_setup_postfix_relay_hosts' also adds 'smtp_tls_security_level = encrypt'
# smtpd_tls_security_level (default: 'may', port 587 'encrypt') | http://www.postfix.org/postconf.5.html#smtpd_tls_security_level
#
# smtpd_tls_auth_only (default not applied, 'no', implicitly 'yes' if security_level is 'encrypt')
# | http://www.postfix.org/postconf.5.html#smtpd_tls_auth_only | http://www.postfix.org/TLS_README.html#server_tls_auth
#
# smtp_tls_wrappermode (default: not applied, 'no') | http://www.postfix.org/postconf.5.html#smtp_tls_wrappermode
# smtpd_tls_wrappermode (default: 'yes' for service port 'smtps') | http://www.postfix.org/postconf.5.html#smtpd_tls_wrappermode
# NOTE: Enabling wrappermode requires a security_level of 'encrypt' or stronger. Port 465 presently does not meet this condition.
#
# Postfix main.cf (base config):
sedfile -i -r \
-e "s|^#?(smtpd?_tls_security_level).*|\1 = none|" \
-e "s|^#?(smtpd_tls_auth_only).*|\1 = no|" \
"${POSTFIX_CONFIG_MAIN}"
#
# Postfix master.cf (per connection overrides):
# Disables implicit TLS on port 465 for inbound (smtpd) and outbound (smtp) traffic. Treats it as equivalent to port 25 SMTP with explicit STARTTLS.
# Inbound 465 (aka service port aliases: submissions / smtps) for Postfix to receive over implicit TLS (eg from MUA or functioning as a relay host).
# Outbound 465 as alternative to port 587 when sending to another MTA (with authentication), such as a relay service (eg SendGrid).
sedfile -i -r \
-e "/smtpd?_tls_security_level/s|=.*|=none|" \
-e '/smtpd?_tls_wrappermode/s|yes|no|' \
-e '/smtpd_tls_auth_only/s|yes|no|' \
"${POSTFIX_CONFIG_MASTER}"
# Dovecot configuration:
# https://doc.dovecot.org/configuration_manual/dovecot_ssl_configuration/
# > The plaintext authentication is always allowed (and SSL not required) for connections from localhost, as theyre assumed to be secure anyway.
# > This applies to all connections where the local and the remote IP addresses are equal.
# > Also IP ranges specified by login_trusted_networks setting are assumed to be secure.
#
# no => insecure auth allowed, yes (default) => plaintext auth only allowed over a secure connection (insecure connection acceptable for non-plaintext auth)
local DISABLE_PLAINTEXT_AUTH='no'
# no => disabled, yes => optional (secure connections not required), required (default) => mandatory (only secure connections allowed)
local DOVECOT_SSL_ENABLED='no'
sed -i -r "s|^#?(disable_plaintext_auth =).*|\1 ${DISABLE_PLAINTEXT_AUTH}|" /etc/dovecot/conf.d/10-auth.conf
sed -i -r "s|^(ssl =).*|\1 ${DOVECOT_SSL_ENABLED}|" "${DOVECOT_CONFIG_SSL}"
;;
( 'snakeoil' ) # This is a temporary workaround for testing only, using the insecure snakeoil cert.
# mail_privacy.bats and mail_with_ldap.bats both attempt to make a starttls connection with openssl,
# failing if SSL/TLS is not available.
;;
( * ) # Unknown option, panic.
dms_panic__invalid_value 'SSL_TYPE' "${SCOPE_TLS_LEVEL}"
;;
esac
}
function _extract_certs_from_acme
{
local CERT_DOMAIN=${1}
if [[ -z ${CERT_DOMAIN} ]]
then
_log 'warn' "_extract_certs_from_acme | CERT_DOMAIN is empty"
return 1
fi
local KEY CERT
KEY=$(acme_extract.py /etc/letsencrypt/acme.json "${CERT_DOMAIN}" --key)
CERT=$(acme_extract.py /etc/letsencrypt/acme.json "${CERT_DOMAIN}" --cert)
if [[ -z ${KEY} ]] || [[ -z ${CERT} ]]
then
_log 'warn' "_extract_certs_from_acme | Unable to find key and/or cert for '${CERT_DOMAIN}' in '/etc/letsencrypt/acme.json'"
return 1
fi
# Currently we advise SSL_DOMAIN for wildcard support using a `*.example.com` value,
# The filepath however should be `example.com`, avoiding the wildcard part:
if [[ ${SSL_DOMAIN} == "${CERT_DOMAIN}" ]]
then
CERT_DOMAIN=$(_strip_wildcard_prefix "${SSL_DOMAIN}")
fi
mkdir -p "/etc/letsencrypt/live/${CERT_DOMAIN}/"
echo "${KEY}" | base64 -d > "/etc/letsencrypt/live/${CERT_DOMAIN}/key.pem" || exit 1
echo "${CERT}" | base64 -d > "/etc/letsencrypt/live/${CERT_DOMAIN}/fullchain.pem" || exit 1
_log 'trace' "_extract_certs_from_acme | Certificate successfully extracted for '${CERT_DOMAIN}'"
}
# Remove the `*.` prefix if it exists, else returns the input value
function _strip_wildcard_prefix {
[[ ${1} == "*."* ]] && echo "${1:2}" || echo "${1}"
}
# Compute checksums of monitored files,
# returned output on `stdout`: hash + filepath tuple on each line
function _monitored_files_checksums
{
local DMS_DIR=/tmp/docker-mailserver
[[ -d ${DMS_DIR} ]] || return 1
# If a wildcard path pattern (or an empty ENV) would yield an invalid path
# or no results, `shopt -s nullglob` prevents it from being added.
shopt -s nullglob
declare -a STAGING_FILES CHANGED_FILES
STAGING_FILES=(
"${DMS_DIR}/postfix-accounts.cf"
"${DMS_DIR}/postfix-virtual.cf"
"${DMS_DIR}/postfix-aliases.cf"
"${DMS_DIR}/dovecot-quotas.cf"
)
if [[ ${SSL_TYPE:-} == 'manual' ]]
then
# When using "manual" as the SSL type,
# the following variables may contain the certificate files
STAGING_FILES+=(
"${SSL_CERT_PATH:-}"
"${SSL_KEY_PATH:-}"
"${SSL_ALT_CERT_PATH:-}"
"${SSL_ALT_KEY_PATH:-}"
)
elif [[ ${SSL_TYPE:-} == 'letsencrypt' ]]
then
# React to any cert changes within the following Let'sEncrypt locations:
STAGING_FILES+=(
/etc/letsencrypt/acme.json
/etc/letsencrypt/live/"${SSL_DOMAIN}"/*.pem
/etc/letsencrypt/live/"${HOSTNAME}"/*.pem
/etc/letsencrypt/live/"${DOMAINNAME}"/*.pem
)
fi
for FILE in "${STAGING_FILES[@]}"
do
[[ -f "${FILE}" ]] && CHANGED_FILES+=("${FILE}")
done
sha512sum -- "${CHANGED_FILES[@]}"
}