1
0
mirror of https://github.com/tomav/docker-mailserver.git synced 2024-07-07 16:41:06 +02:00
docker-mailserver/test/tests/serial/mail_smtponly.bats

69 lines
1.9 KiB
Plaintext
Raw Normal View History

load 'test_helper/common'
function setup_file() {
tests(fix): Adjust for local testing conditions (#2606) * tests(fix): Increase some timeouts Running tests locally via a VM these tests would fail sometimes due to the time from being queued and Amavis actually processing being roughly around 30 seconds. There should be no harm in raising this to 60 seconds, other than delaying a failure case which will ripple through other time sensitive tests. It's better to pass when functionality is actually correct but just needs a bit longer to complete. * tests(fix): Don't setup an invalid hostname During container startup `helpers/dns.sh` would panic with `hostname -f` failing. Dropping `--domainname` for this container is fine and does not affect the point of it's test. --- It's unclear why this does not occur in CI. Possibly changes within the docker daemon since as CI runs docker on Ubuntu 20.04? (2020). For clarity, this may be equivalent to setting a hostname of `domain.com.domain.com`, or `--hostname` value truncated the NIS domain (`--domainname`) of the same value. IIRC, it would still fail with both options using different values if `--hostname` was multi-label. I believe I've documented how non-deterministic these options can be across different environments. `--hostname` should be preferred. There doesn't seem to be any reason to actually need `--domainname` (which is NIS domain name, unrelated to the DNS domain name). We still need to properly investigate reworking our ENV support that `dns.sh` manages. --- Containers were also not removing themselves after failures either (missing teardown). Which would cause problems when running tests again. * chore: Normalize white-space Sets a consistent indent size of 2 spaces. Previously this varied a fair bit, sometimes with tabs or mixed tabs and spaces. Some formatting with blank lines. Easier to review with white-space in diff ignored. Some minor edits besides blank lines, but no change in functionality. * fix: `setup.sh` target container under test Some of the `setup.sh` commands did not specify the container which was problematic if another `docker-mailserver` container was running, causing test failures. This probably doesn't help with `test/no_container.bats`, but at least prevents `test/tests.bats` failing at this point.
2022-05-30 02:53:30 +02:00
docker run --rm -d --name mail_smtponly \
-v "$(pwd)/test/test-files":/tmp/docker-mailserver-test:ro \
-e SMTP_ONLY=1 \
-e PERMIT_DOCKER=network \
-e OVERRIDE_HOSTNAME=mail.my-domain.com \
-t "${NAME}"
wait_for_finished_setup_in_container mail_smtponly
}
function teardown_file() {
tests(fix): Adjust for local testing conditions (#2606) * tests(fix): Increase some timeouts Running tests locally via a VM these tests would fail sometimes due to the time from being queued and Amavis actually processing being roughly around 30 seconds. There should be no harm in raising this to 60 seconds, other than delaying a failure case which will ripple through other time sensitive tests. It's better to pass when functionality is actually correct but just needs a bit longer to complete. * tests(fix): Don't setup an invalid hostname During container startup `helpers/dns.sh` would panic with `hostname -f` failing. Dropping `--domainname` for this container is fine and does not affect the point of it's test. --- It's unclear why this does not occur in CI. Possibly changes within the docker daemon since as CI runs docker on Ubuntu 20.04? (2020). For clarity, this may be equivalent to setting a hostname of `domain.com.domain.com`, or `--hostname` value truncated the NIS domain (`--domainname`) of the same value. IIRC, it would still fail with both options using different values if `--hostname` was multi-label. I believe I've documented how non-deterministic these options can be across different environments. `--hostname` should be preferred. There doesn't seem to be any reason to actually need `--domainname` (which is NIS domain name, unrelated to the DNS domain name). We still need to properly investigate reworking our ENV support that `dns.sh` manages. --- Containers were also not removing themselves after failures either (missing teardown). Which would cause problems when running tests again. * chore: Normalize white-space Sets a consistent indent size of 2 spaces. Previously this varied a fair bit, sometimes with tabs or mixed tabs and spaces. Some formatting with blank lines. Easier to review with white-space in diff ignored. Some minor edits besides blank lines, but no change in functionality. * fix: `setup.sh` target container under test Some of the `setup.sh` commands did not specify the container which was problematic if another `docker-mailserver` container was running, causing test failures. This probably doesn't help with `test/no_container.bats`, but at least prevents `test/tests.bats` failing at this point.
2022-05-30 02:53:30 +02:00
docker rm -f mail_smtponly
}
#
# configuration checks
#
@test "checking configuration: hostname/domainname override" {
run docker exec mail_smtponly /bin/bash -c "cat /etc/mailname | grep my-domain.com"
assert_success
}
#
# imap
#
@test "checking process: dovecot imaplogin (disabled using SMTP_ONLY)" {
run docker exec mail_smtponly /bin/bash -c "ps aux --forest | grep -v grep | grep '/usr/sbin/dovecot'"
assert_failure
}
@test "checking configuration: dovecot quota absent in postconf (disabled using SMTP_ONLY)" {
run docker exec mail_smtponly /bin/bash -c "postconf | grep 'check_policy_service inet:localhost:65265'"
assert_failure
}
#
# smtp
#
@test "checking smtp_only: mail send should work" {
run docker exec mail_smtponly /bin/sh -c "postconf smtp_host_lookup=no"
assert_success
run docker exec mail_smtponly /bin/sh -c "/etc/init.d/postfix reload"
assert_success
wait_for_smtp_port_in_container mail_smtponly
run docker exec mail_smtponly /bin/sh -c "nc 0.0.0.0 25 < /tmp/docker-mailserver-test/email-templates/smtp-only.txt"
assert_success
run docker exec mail_smtponly /bin/sh -c 'grep -cE "to=<user2\@external.tld>.*status\=sent" /var/log/mail/mail.log'
[[ ${status} -ge 0 ]]
}
#
# PERMIT_DOCKER=network
#
@test "checking PERMIT_DOCKER=network: opendmarc/opendkim config" {
run docker exec mail_smtponly /bin/sh -c "cat /etc/opendmarc/ignore.hosts | grep '172.16.0.0/12'"
assert_success
tests(fix): Adjust for local testing conditions (#2606) * tests(fix): Increase some timeouts Running tests locally via a VM these tests would fail sometimes due to the time from being queued and Amavis actually processing being roughly around 30 seconds. There should be no harm in raising this to 60 seconds, other than delaying a failure case which will ripple through other time sensitive tests. It's better to pass when functionality is actually correct but just needs a bit longer to complete. * tests(fix): Don't setup an invalid hostname During container startup `helpers/dns.sh` would panic with `hostname -f` failing. Dropping `--domainname` for this container is fine and does not affect the point of it's test. --- It's unclear why this does not occur in CI. Possibly changes within the docker daemon since as CI runs docker on Ubuntu 20.04? (2020). For clarity, this may be equivalent to setting a hostname of `domain.com.domain.com`, or `--hostname` value truncated the NIS domain (`--domainname`) of the same value. IIRC, it would still fail with both options using different values if `--hostname` was multi-label. I believe I've documented how non-deterministic these options can be across different environments. `--hostname` should be preferred. There doesn't seem to be any reason to actually need `--domainname` (which is NIS domain name, unrelated to the DNS domain name). We still need to properly investigate reworking our ENV support that `dns.sh` manages. --- Containers were also not removing themselves after failures either (missing teardown). Which would cause problems when running tests again. * chore: Normalize white-space Sets a consistent indent size of 2 spaces. Previously this varied a fair bit, sometimes with tabs or mixed tabs and spaces. Some formatting with blank lines. Easier to review with white-space in diff ignored. Some minor edits besides blank lines, but no change in functionality. * fix: `setup.sh` target container under test Some of the `setup.sh` commands did not specify the container which was problematic if another `docker-mailserver` container was running, causing test failures. This probably doesn't help with `test/no_container.bats`, but at least prevents `test/tests.bats` failing at this point.
2022-05-30 02:53:30 +02:00
run docker exec mail_smtponly /bin/sh -c "cat /etc/opendkim/TrustedHosts | grep '172.16.0.0/12'"
assert_success
}