Update the README
This commit is contained in:
parent
1df48d32c9
commit
f405a021ba
18
README.md
18
README.md
|
@ -19,21 +19,9 @@ However this requires some prerequisites.
|
|||
|
||||
## Raspberry Pi installation
|
||||
|
||||
1. Download the image from: https://hydra.nixos.org/job/nixos/release-22.05/nixos.sd_image.aarch64-linux
|
||||
2. Extract it with: `unzstd nixos-sd-image-*-aarch64-linux.img.zst`
|
||||
3. Flash it to the SD card with `sudo dd if=$(ls
|
||||
nixos-sd-image-*-aarch64-linux.img) of=/dev/mmcblk0 bs=4M`
|
||||
4. After booting create a password for the `nixos` user.
|
||||
5. Get the system key and add it to `scrts/secrets.nix`. Use `ssh-keyscan
|
||||
nixos.2li.local`.
|
||||
6. SSH into the system.
|
||||
7. `curl https://git.2li.ch/Nebucatnetzer/nixos/archive/master.tar.gz | tar xz`
|
||||
8. `sudo cp nixos/systems/raspi4/init_config.nix /etc/nixos/configuration.nix`
|
||||
9. `sudo nixos-rebuild switch`
|
||||
10. Mount the `FIRMWARE` partition `sudo mount /dev/disk/by-label/FIRMWARE /mnt`
|
||||
and make sure that your `config.txt` looks like [./systems/raspi4/config.txt](./systems/raspi4/config.txt)
|
||||
11. Install the system by running this command on your computer:
|
||||
`./scripts/install_new_system.sh`
|
||||
1. Add the new system to `flake.nix`.
|
||||
2. Build the image with `scritps/build-raspi-image.sh SYSTEMNAME`
|
||||
3. Flash the image to an SD card `dd if=~/Downloads/SYSTEMNAME.img of=/dev/mmcblk0 bs=4M`.
|
||||
|
||||
## x86 installation
|
||||
|
||||
|
|
Loading…
Reference in New Issue